YG200_200L_E - 第60页
2-13 2 Basic operation n M a n u a l h e a d o p e r a t i o n [Unit] – [Head] screen 1 2 3 5 4 7 6 24 2 1 8 - M 0 -0 0 B u t t o n n a m e F u n c t i o n 1 Vac u u m T u r n s t h e v a c u u m o f e a c h h e a d o n …
2-12
2
Basic operation
Button name Function
8 Push Up
Opens the "Conveyor Push Up"
dialog box. Check or enter the board
thickness and press the [OK] button to
clamp the board by pushing it up from
the bottom.
9
Edge Clamp
(YG200L only)
Use this button to check the edge clamp operation.
n
Axis movement
"Move Axis" screen
1
2
3
4
5
6
24206-M2-00
Button name Function
1 Zoom in/out (+, -) Zooms in or out the image. (16 times to 1/16 times)
2 Mark Light Allows changing mark lighting manually. Using this button does not affect data.
3 PTP
Displays the "PTP" dialog box that allows directly specifying the position where
you want to move the selected axis.
4 Step Mode
When this button is pushed in, the selected axis can be moved in "step mode
(inching mode)" with the arrow buttons at a specified step stroke (inching
stroke).
5 Arrow Use these buttons to move the selected axis in the desired direction.
6 Y/YT Use these buttons to switch between the Y axis and YT axis (table axis).
2-13
2
Basic operation
n
Manual head operation
[Unit] – [Head] screen
1
2
3
5
476
24218-M0-00
Button name Function
1 Vacuum Turns the vacuum of each head on or off.
2 Blow Turns the air blow in each head on or off.
3 Nozzle Change
Opens the "Nozzle Change" dialog box.
Specify the head and nozzle type to
perform nozzle change.
4 Current Nozzles
Shows a list of nozzle types currently
attached to each head.
5 Axis
Opens the "Move Axis" screen. This is the same as the [Axis] button on the [Unit]-
[Conveyor] screen.
6 Slow Switches the head up/down speeds between "fast" and "slow".
7 Head Moves the heat up or down.
2-14
2
Basic operation
n
Manual feeder operation
[Unit] – [Feeder] screen
3 4
1
2
24222-M0-00
Button name Function
1 Left/right arrows Scrolls through the drive valve number display.
2 Up/down arrows
Switches the drive valve number display between the front and rear
sides.
3 Drive valve Turns the feeder shutter drive valve on or off.
4 Reset Turns off all drive valves at a time.