Dek Training - 第51页
X1 to X3 can swappable. D e k P r i n t e r T r a i n i n g 4 7 / 7 0 2 5 J u n e 2 0 0 6
28. M36 Control Box控制箱
& rear actuator(X forward & X rear offset motor)X方向前后钢网移
– Front & Rear squeegee 前后刮刀
g rail Y方向后钢网移动及PCB阔度
CAN Bus 控制板
epper drive cards
ed
,有四个仿真输出信号,有二个仿真输入信号,有
二＋个數字输入信号及八个數字输出信号经Next Move Interface Card(X4).
h
g a CAN Bus
6 & X7 Not use. X6 & X7 不用
马迖控制
X1: X fwd
动
X2
X3 – Y actuator(Y offset motor) & movin
X4 – Next move Interface card 接口板
X5 – nextmove ES board (CAN Node 1)
The NextMove ES can control six stepper motor axes via st
and provides 4 analogue outputs, 2 analogue inputs, 20 digital inputs (interfac
through the NextMove Interface card) and 8 digital outputs (interfaced through
the NextMove Interface card).
NextMove板可控制六个步进马迖
Two of the analogue outputs are used as demand outputs to control linear
motors for camera X and Camera Y (linear drive machines only).
二个仿真输入信号是给 Camera Linear Motor X & Y..
The card also incorporates a CAN encoder/decoder whic
connects to I/O Node boards and Servo/Stepper Nodes usin
network. .
X
Dek Printer Training 46/70 25 June 2006
X1 to X3 can swappable.
Dek Printer Training 47/70 25 June 2006
X1,X2 & X3 Layout 外形
Dek Printer Training 48/70 25 June 2006