00193796-08 - 第65页

Installation Manual Station Software Version 505.04

64 of 156

Boot Sequence Set the boot media sequence:

A:, C:

The system first attempts to boot from drive A:, then from drive C:

Typematic Sets the keyboard reaction time.

Num Lock On This option sets whether the BIOS sets the Num Lock feature on the

keyboard on or off prior to booting.

Halt on Errors If this option is activated, BIOS will stop during the start-up process in the

event of an error and will display an error message. If this option is not

activated, the BIOS continues without an error message and uses the

default values for processing. If the option is activated, the following

causes of errors can additionally be ruled out:

Keyboard Errors Keyboard errors do not generate an error message.

Disk Errors Floppy and hard disk errors do not generate an error

message.

Quick Memory-

Test

Caution: Due to hardware synchronization, this option must

not be activated

.

4.4.1.8 Setup page "Standard Chipset"

┌────────────────────┤ Standard Chipset ├─────────────────────┐

│ │

│ ╔══════╗ ┌──────┐ ┌───────┐ │

│ ║ OK ║ │Cancel│ │Default│ │

│ ┌─System Cache─────────────┐ ╚══════╝ └──────┘ └───────┘ │

│ │ ( ) Disabled │ │

│ │ ( ) Primary Only │ ┌─Secondary Cache Size───────┐ │

│ │ (*) Primary and Secondary│ │ 256 KB Pipelined Burst │ │

│ └──────────────────────────┘ └────────────────────────────┘ │

│ ┌─Shadow and Cache Options────────────────────────────────┐ │

│ │ Shadow Cache Shadow Cache │ │

│ │ System ROM: [√] Video ROM: [√] [√] │ │

│ │ C800-CBFF: [ ] [ ] CC00-CFFF: [ ] [ ] │ │

│ │ D000-D3FF: [ ] [ ] D400-D7FF: [ ] [ ] │ │

│ │ D800-DBFF: [ ] [ ] DC00-DFFF: [ ] [ ] │ │

│ └─────────────────────────────────────────────────────────┘ │

│ Press [F1] key for help │

└─────────────────────────────────────────────────────────────┘

This page is used to make the standard chipset settings.

System Cache

You can specify the use of the processor cache.

Primary and

Secondary

The internal processor cache and the external cache are used.

Installation Manual, Station Software Version 505.04 Edition 07/2006

65 of 156

Secondary Cache Size

The size of the secondary cache detected by the BIOS is displayed.

Shadow and Cache Options

Sets shadow and cache options for various memory areas.

This setting is only relevant for ISA adapters, as PCI adapters are always shadowed and cached.

The Cache option can only be activated if the Shadow option has been activated.

Shadow The relevant memory area (generally an option ROM in an ISA adapter)

is copied to DRAM for faster processing.

Cache The area is also cached.

4.4.1.9 Setup page "Advanced Chipset"

┌───────────────────────────┤ Advanced Chipset ├────────────────────────────┐

│┌─DRAM Timing───────────────────────┐┌─DRAM Error────────┐┌──────────────┐ │

││ ││ ││ ╔══════╗ │ │

││ DRAM Speed: (*) 60 ns ││ ││ ║ OK ║ │ │

││ ( ) 70 ns ││ (*) None ││ ╚══════╝ │ │

││ ( ) User defined ││ ( ) Parity ││ ┌──────┐ │ │

││ ││ ( ) ECC ││ │Cancel│ │ │

││ DRAM Read Burst: x222/x333 ││ ││ └──────┘ │ │

││ DRAM Write Burst: x222 ││ (*) Multiple ││ │ │

││ Fast RAS to CAS Delay: 3 Clocks ││ ( ) Single ││ ┌───────┐ │ │

││ Leadoff: 6 Cl-Rd, 5 Cl-Wr, 3 BAS ││ ││ │Default│ │ │

││ ││ ││ └───────┘ │ │

│└───────────────────────────────────┘└───────────────────┘└──────────────┘ │

│┌─I/O Recovery Times────────────────┐┌─Miscellaneous─────────────────────┐ │

││ ││ │ │

││ 8 Bit Cycles: +1 Clock ││ [√] Enable Memory Hole at 15-16MB │ │

││ 16 Bit Cycles: +1 Clock ││ │ │

││ ││ │ │

│└───────────────────────────────────┘└───────────────────────────────────┘ │

│ Press [F1] key for help │

└───────────────────────────────────────────────────────────────────────────┘

This page is used to make advanced chipset settings.

DRAM Timing

Sets the DRAM timing.

The DRAM timing is set optimally by the BIOS and will generally not need to be changed.

I/O Recovery Times

Sets the I/O recovery times in ISA bus clocks for 8-bit I/O and 16-bit I/O

DRAM Error

Sets the DRAM error handling method in the BIOS for DIMMs with a parity bit.

Installation Manual Station Software Version 505.04

66 of 156

The chipset suppurts automatic detection and correction of DRAM bit errors using ECC as well as

normal parity handling. This setting is only effective if DIMMs with a parity bit are used.

None No error handling. Bit errors are not detected.

Miscellaneous

Enable Memory

Hole at 15-16MB

Address window for SIPLACE GEM option

4.4.1.10 Setup page "Peripherals"

┌────────────────────────┤ Peripherals ├────────────────────────┐

│ │

│ ┌─Serial / Parallel Ports───────────────────────┐ │

│ │ Serial Port A: 3F8h, IRQ4 │ ╔══════╗ │

│ │ Serial Port B: 2F8h, IRQ3 │ ║ OK ║ │

│ │ Parallel Port: 378h, IRQ7 Bidirectional │ ╚══════╝ │

│ └───────────────────────────────────────────────┘ │

│ ┌─IDE / Floppy Controller───────────────────────┐ ┌──────┐ │

│ │ Primary IDE: Enabled │ │Cancel│ │

│ │ Secondary IDE: Disabled │ └──────┘ │

│ │ Floppy Disks: Enabled Normal │ │

│ └───────────────────────────────────────────────┘ ┌───────┐ │

│ ┌─Miscellaneous─────────────────────────────────┐ │Default│ │

│ │ PS/2 Mouse: Disabled │ └───────┘ │

│ └───────────────────────────────────────────────┘ │

│ Press [F1] key for help │

└───────────────────────────────────────────────────────────────┘

This setup page allows you to make settings for the peripherals.

Serial / Parallel Ports

Serial Port A: Sets the I/O addresses and IRQs of serial port A:

3F8h, IRQ4

Serial Port B: Sets the I/O addresses and IRQs of serial port B:

2F8h, IRQ3

Parallel Port: Sets the I/O addresses, IRQs and mode of the parallel port:

378h, IRQ7

Bidirectional

Port can be used for input and output

IDE/Floppy Controller

Primary IDE:

Enabled

DIE channel enabled