00193796-08 - 第73页
Installation Manual, Station Software Version 505.04 Edition 07/2006 73 of 156 • The installation program on screen. Press any key to continue or cancel with <Esc>. • The software version and the machine type are d…
Installation Manual Station Software Version 505.04
72 of 156
− You must use a formatted floppy.
(The program does not allow you to format the floppy as you create it.)
− Each time the executable is called it will create one disk only
− Before and during creation of each disk, no other tool may be permitted to access this floppy (e.g. the
current Explorer window, the path of a DOS box must not be set to the A: drive).
− When the second floppy is created, the incorrect message "Insert floppy 1" appears. It should read
"Insert floppy 2".
4.4.3.2 Installation procedure
• Insert the "Rmos-1" floppy in the drive of the M54 and switch the station on.
• The following message will appear on screen:
Starting MS-DOS...
DO YOU WANT TO CONTINUE INSTALLATION ?
[Y] CONTINUE [N] REBOOT SYSTEM TO CHECK OR CHANGE
SETUP
[A] SET INTERNET ADDRESS
PRESS KEY TO CONTINUE [Y,N,A]?
'Y' continues the installation.
NOTES: with the error message „INVALID MEDIA TYPE“ you have to continue with (f)ail
(2 kick x; preferably at the formatting of new hard disk, the installation is then continued.
'A' sets the network addresses and port IDs.
This selection is only possible after initial installation.
Notes:
After the initial installation, the installed standard files must be adapted to the user network.
Update / upgrade retains the network addresses which have already been set.
∧ The Internet addresses of the M54 are saved in 'C:\ETC\HOSTS'.
∧ The port IDs of the M54 are saved in 'C:\ETC\SERVICES'.'
Installation Manual, Station Software Version 505.04 Edition 07/2006
73 of 156
• The installation program on screen.
Press any key to continue or cancel with <Esc>.
• The software version and the machine type are displayed.
Press any key to continue or cancel with <Esc>.
• The main menu appears:
>>>
>>>
------------------Install Revision of SIPLACE Operating System
------------------
Terminate SIPLACE Installation Program
Main Menue of SIPLACE Installation MCRM3 40x.xx
Use the [Up Arrow] [Down Arrow] [Pg Up] [Pg Dn] keys to move the highlight bar to select the
button you prefer.
Press [Enter] to activate your selection
Note:
If a submenu or a function in the installation program is selected, the cursor flashes gray.
• Select the function "Install Revision of SIPLACE Operating System" and confirm with <RETURN>.
• The installation is started. The following query appears:
>>>
>>>
-----No
-----Yes
1. WARNING
installation of SIPLACE operating system will only save files keeping machine data.
A
ll other files of user’s interrest have to be saved on floppy disc by user manually.
Otherwise these files will bedeleted.
Continue SIPLACE Installation Job?
Use the [Up Arrow] [Down Arrow] [Pg Up] [Pg Dn] keys to move the highlight bar to select the
button you prefer.
Press [Enter] to activate your selection
Installation Manual Station Software Version 505.04
74 of 156
• Use the cursor keys to select the option to continue.
Warning!
Only machine data is saved. All user data is deleted. If necessary, save your user data to floppy.
• Confirm your selection with <RETURN>.
• If you have selected “Yes“, the installation is continued and the following screen display appears.
>>>
>>>
-----No
-----Yes
2. WARNING
Partition “C:“ of your hard disc will be formatted:
⇒
all files will be deleted.
Continue SIPLACE Installation Job?
Use the [Up Arrow] [Down Arrow] [Pg Up] [Pg Dn] keys to move the highlight bar to select the
button you prefer.
Press [Enter] to activate your selection
• Use the cursor keys to select whether to continue ("Yes") or cancel ("No").
Warning:
The C: partition will be formatted. All data which has not been saved will now be deleted.
• Confirm your selection with <RETURN>. The installation is then continued.
• You are now requested to insert the floppy MCRMOS HS50 Disk -1/2- into the drive.
• After both floppies have been installed, the message "Installation finished" appears.
The M54 operating system has been completely installed.
Now remove the floppy from the drive and switch the machine off and then on again.