DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第18页
Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide iv Do not open the door during operation. Part where this label is att ached contains moving part s, it is very dangerous if the user open the cove…
Preface
iii
Safety Precaution
Following labels described in each section are attached on specific position of this
machine. Follow the instructions on each label for operating this machine safely.
If a label has come off or has damaged, put a new one on a specific position referring to the
following figures. For ordering a new label or offering any comment, questions, please
contact to the business department or the local agent designated by Hanwha Precision
Machinery Co., Ltd.
Front View of the Machine
The following labels are attached on the front part of this machine.
Figurei.1 Safety labels attached on the front part of the machine
Do not modify the door key.
Unauthorized modification of the door key is
prohibited. It may be dangerous.
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
iv
Do not open the door during operation.
Part where this label is attached contains
moving parts, it is very dangerous if the user
open the cover while operating.
As the current with high-voltage flows inside
the cover or in the area near the switch,
take precautions against electric shock.
Be sure to turn off the main switch in the
left-lower cover of the rear side before
maintenance.
Do not remove the safety device. It could
cause personal injuries or serious
problems.
Do not put a hand in during operation.
Part where this label is attached contains
moving parts, it is very dangerous if the user
disassembles any part or opens the cover
while operating.
Stop the machine before servicing.
Stop the machine before maintenance or
error troubleshooting.
Preface
v
Be sure to tighten the anti-loosening nut.
After the equipment has been leveled, be
sure to lock the anti-loosening nut tightly
using the extension handle.
Be careful when cleaning the cover.
Dip a clean ultra-fine fiber cloth in the
specified cleaning liquid, and wipe the
acrylic cover of the door gently using the
cloth.
The following actions may damage the anti-
static cover. For this reason, please handle
carefully.
Cleaning using hydrogen carbonate,
ester, ketone, acid, strong alkali or
chemicals similar to these
Cleaning by rubbing the acrylic cover
applying strong force with an ultra-fine
fiber cloth