DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第226页

7-62 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide  <Move> button Used for parts recognition test by ma nually picking up parts.Please refer to “7.1.1 Common Align Data” for more Informa…

100%1 / 632
7-61
Part Registration
button
Select the light for the camera to recognize the component. Please refer to“7.1.1
Common Align Data” for more Information.
<Size> group
Set the align size.
<Lead Num> edit box
Set the number of leads on a side.
<Missing Pin Num> edit box
Input the number of empty leads at the center of the lead group, which are located
diagonally at the upper and lower sides. If the leads are not emptied diagonally at
the upper and lower sides, register the part as User IC.
<Total Y> edit box [SOP /SOJ]
Displays the size of the whole component in Y direction. It is calculated and
displayed when <Body Y> and <Lead Length> are determined. ( <Body Y>
+<Lead Length> *2)
<Total X> edit box [SOP2 /SOJ2]
Displays the size of the whole component in X direction. It is calculated and
displayed when <Body X> and <Lead Length> are determined. ( <Body X>
+<Lead Length> *2)
<Body Y> edit box
Set the component size in Y direction.
<Tolerance> edit box
Set the tolerance of the component data. Default is 30%.
<Lead Width> edit box
Set the width of lead.
<Lead Pitch> edit box
Set the lead pitch.
<Lead Foot> edit box
Set the length of the lead that touches the surface.
<Lead Length> edit box
Set the length of the lead viewed in the Align Camera.
For other setups, please refer to“7.1.1 Common Align Data”.
<Option> group
Set the Align Option data. Please refer to“7.1.1 Common Align Data” for more
Information.
7-62
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
<Move> button
Used for parts recognition test by manually picking up parts.Please refer to“7.1.1
Common Align Data” for more Information.
<Test> button
Tests component recognition by using the set align data. Please refer to“7.1.1
Common Align Data” for more Information.
<Image Capture> button
Helps to specify the optimum lighting value. The lighting is gradually changed
automatically and the images are saved. The user can check the best image and
identify the optimum lighting value. Please refer to “7.1.1 Common Align Data” for
more Information.
<Auto Teach> button
Automatically finds out the component align data. Please refer to“7.1.1 Common
Align Data” for more Information.
7.1.3.2. QFP component data setting
Set the align data for QFP components.
Figure7.22 “Package Group =QFP” dialog box
<Camera No.> combo box
Select the camera to recognize the component. Please refer to “7.1.1 Common Align
Data” for more Information.
7-63
Part Registration
button
Set the light for the camera to recognize the component. Please refer to“7.1.1
Common Align Data” for more Information.
<Size> group
Set the Align size.
<X Lead Num> edit box
Set the number of leads on the X direction.
<Y Lead Num> edit box
Set the number of leads on the Y direction.
<Total X> edit box
Displays the size of the whole component in X direction. It is calculated and
displayed when <Body X> and <Lead Length> are determined. ( <Body X>
+<Lead Length> *2)
<Total Y> edit box
Displays the size of the whole component in Y direction. It is calculated and
displayed when <Body Y> and <Lead Length> are determined. ( <Body Y>
+<Lead Length> *2)
<Tolerance> edit box
Set the tolerance of the component data. Default is 30%.
<Body X> edit box
Set the component size in X direction.
<Body Y> edit box
Set the component size in Y direction.
<Lead Width> edit box
Set the width of lead.
<Lead Pitch> edit box
Set the lead pitch.
<Lead Foot> edit box
Set the length of the lead that touches the surface
<Lead Length> edit box
Set the length of the lead viewed in the Align Camera.
For other setups, please refer to “7.1.1 Common Align Data”.
<Option> group
Set the Align Option data. Please refer to“7.1.1 Common Align Data” for more