DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第276页
8-18 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide 1. <Feeder Base> Displays the feeder base where the corres ponding stick unit is installed currently . The numbers displayed are as foll…
8-17
Feeder Setup
box.
<Dump> column
When the stick feeder is installed in the corresponding slot, select the dump box
for the component placed on the stick feeder. Available dump boxes are as
follows.
System Dump: The dump box set in the system, it is installed in the front of the
conveyor.
User Dump: The dump box set in the system by the user, the location should be set
in the system..
<Unit> group
Select the feeder base unit to edit.
The and buttons are used for selecting the feeder base.
<Feeder Move> button
Moves the cursor only to the grid group where the feeder is installed.
button
Selects the slot previous to the slot of the currently selected stick feeder..
button
Selects the slot next to the slot of the currently selected stick feeder.
<Type> combo box
Select the type of stick unit to install. Available types are as follows.
Stack Stick: Stick unit where the same type of components are installed vertically.
Multi Stick: One or many types of components are installed horizontally.
Belt Multi Stick: Directly transfers the components supplied through the stick
using the motor driven belt conveyor.
Slim Stick: Composed of a structure that moves the stick forward and backward
by way of pneumatic pressure. The components are aligned on the component
guide by the impact caused from forward movement. They are then aligned with
further accuracy while slowly moving backward.
Bulk/Bowl Feeder: Selected when supplying parts to the machine using a bulk/
bowl feeder.
<Install to Feeder Base> group
When installing stick unit to the feeder base, set the feeder base unit and slot number
to install.
8-18
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
1. <Feeder Base>
Displays the feeder base where the corresponding stick unit is installed currently.
The numbers displayed are as follows.
0: Not installed on any feeder base.
1: Installed on Feeder Base (Front Feeder Base) 1.
2: Installed on Feeder Base (Rear Feeder Base) 2.
2. <Slot No.>
Displays the slot number of the feeder base where the corresponding stick unit is
installed currently. The numbers displayed are as follows.
0: Not installed in any slot.
1 - 52: Installed in the corresponding number slot.
3. <Change…> button
In the case of installing stick unit to the feeder base, change the feeder base unit
and slot number to install. When this button is clicked on, the following dialog
box is displayed.
<Install Feeder Base> group
Feeder Base
Displays the feeder base where the corresponding stick unit is installed
currently. The numbers displayed are as follows
0: Not installed on any feeder base.
1: Installed on Feeder Base (Front Feeder Base)1.
2: Installed on Feeder Base (Rear Feeder Base)2.
Slot No.
Designates the order in which the stick feeder is installed.
<Update> button
Saves the set contents and closes the dialog box.
<Cancel> button
Closes the dialog box without saving the set contents.
<Teach> group
8-19
Feeder Setup
Used for moving the selected object to the assigned position of coordinates by rotating
XY axis driving motor, or for obtaining the present coordinates of the selected object.
<Light> combo box
Setup illumination of fiducial camera to be used for teaching. Please refer to
“7.1.1 Common Align Data” for more information.
combo box
Used for selecting the object to move to the designated coordinates by rotating the
XY axis driving motor or to select the object for which the present coordinates is
searching. Selectable objects are as follows:
Fid Cam1/2: Select the fiducial camera.
Head 1 ~ Head 10: Select #1 ~ #10 heads.
<Move> button
Move the object selected in the combo box to the position of the assigned
coordinates. Before executing <Move> button, the cell in the grid (Coordinates for
pickup point of stick feeder) corresponding to the desired position must be clicked
on.
<Get> button
Obtain coordinates for XY axis with reference to the object selected in the combo
box. At this time, Before executing <Get> button, the cell in the grid (Coordinates
for pickup point of stick feeder) corresponding to the desired position must be
clicked on.
<Pick> button
Picks up parts from the presently selected stick feeder. At this time, the head (Device)
to pickup the part must be selected first. When the pick-up is successful, the following
dialog box is displayed.
Please refer to“8.1.1 Feeder Base” of <Pick> button for more information.
<2Pt. Teach…> button
When teaching the pick-up position of the stick feeder, the center point is calculated
by teaching two corner points at opposite angles of the pocket with the component.
Please refer to “8.1.1 Feeder Base” of <2Pt. Teach…> button for more information.
<Offset> button
Applies the offset collective to the Z axis coordinate of the pickup point of the feeder
selected from the <Grid> group.