DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第373页

13-21 Production Setup 13.4. Cont. [F4] When the “PCB Download” opera tion has been completed, this button is activated while the placement is not in progress, and it is inac tivated while the placem ent is in progres s.…

13-20

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

13.3. Stop [F3]

When the “PCB Download” operation has been completed, this button is activated while

the placement is in progress, and it is inactivated while the placement is not in progress.

This submenu transmits the command to stop the placement related to the downloaded

PCB data to the equipment.

Caution Inserting a part of body while the equipment is in operation

or in temporary stop could result in severe injury.

Do not insert a part of body while the equipment is in

operation or in temporary stop.

13-21

Production Setup

13.4. Cont. [F4]

When the “PCB Download” operation has been completed, this button is activated while

the placement is not in progress, and it is inactivated while the placement is in progress.

This command transmits the command to continue the placement related to the

downloaded PCB data at the position where the operation was stopped previously to the

equipment.

 The cases that “Cont.” command is not available are as follows:

 When a new PCB file is downloaded

 When the number of Cycle is changed

 “Cont.” command is available is for the following case

 When the step data related to head or feeder or nozzle or skip is changed

13-22

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

13.5. Finish [F5]

This submenu transmits to the equipment the command to completely stop the placement

related to the downloaded PCB data.