DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第377页

13-25 Production Setup Memo T o activate the <Edit> column, th e option “Use tray manage by pocket” must be set in the “Preferences” submenu of the “System Setup” menu.  <Part> colum n Displays the name of t…

13-24

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

Displays the number of tray step.

 <Remain> column

Indicates the number of parts remaining in the corresponding pallet.

<Reset> column

<Refill> button

After refilling components for empty pallets, Clicking this button, The

number of parts displayed in the <Remain> column changes to the initial

value. (e.g., for a 10 x 10 pallet, the number of parts in the <Remain> column

changes to “100”.)

<Empty> column

<Empty> button

The number of parts displayed in the <Remain> column changes to ‘0’.

<Edit> column

<Edit> button

You can manually set whether parts remaining in the palette exist or not.

During production, if it fails to adsorb/recognize a part, that part is dumped to

the pallet's original pocket location. At this time, the positions of remaining

parts are irregular. When reusing the pallet for production, manually select the

pocket position where the part is located.

13-25

Production Setup

Memo To activate the <Edit> column, the option “Use tray manage by

pocket” must be set in the “Preferences” submenu of the “System

Setup” menu.

 <Part> column

Displays the name of the component supplied the Tray

 <All Reset> button

The number of parts displayed in the <Remain> column will change to the initial

value (All palettes in all Tray Feeder Units).

 <Refill all> button

The number of parts displayed in the <Remain> column will change to the initial

value (All pallets of the selected Tray Feeder Unit).

 <Update> button

Transmits the set data to the equipment and closes the dialog box.

 <Cancel> button

Ignores the set data and closes the dialog box.

13-26

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

13.7. PCB D/L [F7]

Transmits the PCB data set in the <PCB Edit> menu to the equipment. Transmission is

possible only when the equipment status is “Finish”.