DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第490页

15-24 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide 15.4. Light [F8] Calibrate the brightness of the light for the ca mera. In order to perfo rm this cal ibration, insert a nozzle for camera te…

15-23

System Setup

 <Probe Location> group

Displays the position of the probe module.

 <Calibration> group

The offset and measurement time for LCR parts are corrected.

 <Diagnosis> group

Checks the measured values for each LCR part.

 <Option & Parameter> group

Sets the interval for LCR inspection during production and inputs the measurement

error for each LCR part.

 <Sub Tolerance> group

Enters the measurement error of the part of the LCR Check module.

15-24

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

15.4. Light [F8]

Calibrate the brightness of the light for the camera. In order to perform this calibration,

insert a nozzle for camera test (LightFix) into the ANC.

Caution Since the nozzle for the SM32x,SM411, SM421 model is

not compatible to the one for the light mapping used for the

SM32x,SM411, SM421 model, do not use it for this

machine.

1: Light Level group

 <Select Camera> combo box

Selection Control

Select the camera to perform light mapping.

 Light Level group

Sets the brightness by light level.

<Level> column

Displays 16 steps of lighting.

<Side> / <Inner> / <Outer>/ <Coaxial> column

For the Fid Camera: Input the side illumination value within the range of 256

values.

For the Fly Camera: Input the side illumination value within the range of 256

15-25

System Setup

values.

 <Mapping/Test> button

Perform test or automatic mapping for the light level for the camera selected from the

<Select Camera> group.

Figure15.11When the Fiducial Camera is selected

Figure15.12When the Fly Camera is selected