DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第62页

2-8 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide  File Man Use it to copy , delete, rename an d clear the files related to MMI.  By Pass Use it to bypass a PCB on the conv eyor without place…

2-7

Structure of MMI Menu

 PCB D/L

Transmits PCB operation data to the equipment. It is possible only when the

equipment status is ‘Finish’.

 Pd. Info

Checks the number of pickups, placements, and pickup error rates by head, nozzle,

and feeder.

 Flux

Perform setup for the warning message related to the operation of the flux module.

2.1.2.2.3. The sub menu tool-bars of the Utility menu tool-bar

 Print

Used to print a PCB file or system data.

 Pd. Info

Reports various production management data for the equipment(PCB information, and

Log information).

 Copy ..

Use it to copy the existing PCB file data to other PCB files.

2-8

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

 File Man

Use it to copy, delete, rename and clear the files related to MMI.

 By Pass

Use it to bypass a PCB on the conveyor without placement operation.

 Warmup

Warms up the driving axis after power supply.

2.1.2.2.4. The sub menu tool-bars of the Diagnosis menu tool-bar

 I/O

Check the I/O status.

 Conveyor

Checks the Stopper, Backup Table, Hole/Edge Fixture, and Conveyor Flow.

 Light

Checks the Camera Light.

 Va c uum

Checks the Vacuum of each head

2-9

Structure of MMI Menu

 Jogbox

Checks the Teaching box function.

 Tray

Checks the Tray Feeder function.

 Motor IO

Indicates the status of sensor inputs related with each motor.

2.1.2.2.5. The sub menu tool-bars of the Sys-setup menu tool-bar

 Head

Calibrates the items related with the head.

 Conv.

Sets up the items related with the conveyor.

 Pos.

Sets up the items related with the feeder base and system dump box.

 Camera

Sets up the items related with the camera and lighting.