00197501-02_AI_WPC_Umbau_X-Series_S_DE_EN - 第50页
Review 50 Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X Series S 03/2020 Table of Contents 5 Appendix .. 87 5.1 Excerpts from the Service Manual .. 87 5.1.1 Settin…
Review
49Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X
Series S 03/2020
Table of Contents
Table of Contents
1 Introduction.. 51
1.1 Safety instructions.. 51
1.1.1 Conventions for the use of safety instructions and symbols.. 51
1.1.2 Safety instructions for working with strong magnetic fields.. 52
1.1.3 Safety instructions for the power supply (without SMPS).. 52
1.1.4 Safety instructions for the power supply (with SMPS).. 53
1.1.5 Safety instructions for the compressed air supply.. 55
1.1.6 Safety instructions for work on the cutting device.. 55
1.1.7 Safety instructions for the gantry.. 55
1.1.8 Safety instructions on hazardous materials.. 55
1.2 Preparatory work..... 56
1.3 Other instructions.. 59
1.3.1 Environmentally-friendly disposal of materials and components.. 59
1.3.2 Use of original accessories and spare parts.. 59
1.3.3 ESD guidelines.. 59
1.3.3.1 What does ESD mean?.. 59
1.3.3.2 Important measures to protect against static charging.. 59
1.3.3.3 Handling ESD modules.. 60
1.3.3.4 Measurements and modifications to ESD modules.. 60
1.3.3.5 Dispatching ESD modules.. 60
1.3.4 Validity of Document.. 60
1.3.5 Release History.. 61
1.4 Abbreviations.. 61
2 Brief description.. 63
2.1 Overview of SIPLACE WPC5/WPC6.. 63
2.1.1 Overview of the Modules.. 64
2.2 Overview of SIPLACE WPC5/WPC6 insert.. 64
2.3 Scope of Delivery.. 65
2.4 Tools and Equipment Required.. 66
3 Setting up and Commissioning.. 67
3.1 Removing the Standard Component Trolley Feed Device.. 68
3.2 Installing the Manual Table.. 70
3.3 Fitting the CAN Switch.. 72
3.4 Fitting the bridge cover SIPLACE WPC on the SIPLACE X-Series S.. 76
3.5 Fitting the Waste Tape Slide.. 77
3.6 Adjusting the Hood.. 79
4 Operator Tasks.. 81
4.1 Docking the SIPLACE WPC5/WPC6.. 81
4.2 Undocking the SIPLACE WPC5/WPC6.. 83
4.3 Automatic Calibration.. 84
Review
50 Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X
Series S 03/2020
Table of Contents
5 Appendix.. 87
5.1 Excerpts from the Service Manual.. 87
5.1.1 Setting the DIP Switch on the CAN Switch.. 87
5.1.2 Control Unit on Cutter (CAN Nodes).. 88
5.1.3 Nozzle Changers and Nozzle Stations - Overview.. 89
5.1.4 Dismantling the Lower Side Cover.. 91
5.2 Circuit Diagrams.. 91
5.2.1 Upgrade kit WPC M2 CAN switch X-Series S.. 92
Review
1 Introduction
1.1 Safety instructions
Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X
Series S 03/2020
51
1 Introduction
This manual describes the replacement of the standard insert with the SIPLACE WPC5/WPC6 in-
sert on SIPLACE® X-Series machines.
1.1 Safety instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.