00197501-02_AI_WPC_Umbau_X-Series_S_DE_EN - 第61页

Review 1 Introduction 1.4 Abbreviations Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X Series S 03/2020 61 1.3.5 Release History Document SIPLACE WPC5 on SIPLACE X-Seri…

Review

1 Introduction

1.3 Other instructions

60 Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X

Series S 03/2020

1.3.3.3 Handling ESD modules

As a general rule: Only touch electronic modules if you must carry out work on the modules. In that

case, make sure that you do not touch the pins or printed conductors when you pick up flat mod-

ules.

Only touch components if you are earthed by one of the following measures:

●

You are wearing an ESD wristband.

●

You are wearing ESD shoes.

●

You are wearing ESD shoe earthing strips on an ESD floor.

Immediately before you touch an electronic module, discharge your own body by touching a con-

ductive and earthed object (such as unpainted parts of a switch cabinet, a water pipe, etc.).

Do not allow modules with chargeable and highly insulating materials to touch one another, e.g.

plastic films, insulating table surfaces or items of clothing made from synthetic fibers.

Always place the modules on a conductive surface (table with an ESD coating, conductive ESD

foam, ESD bag or container).

Do not move the assemblies near to data view devices, monitors or television units. Keep a min-

imum distance of 10 cm to monitors.

1.3.3.4 Measurements and modifications to ESD modules

Only perform measurements on modules if one of the following conditions is fulfilled:

●

You are using an earthed measuring device (e.g. via PE conductors)

●

You are using a potential-free measuring device and discharge the measuring head before

the measurement (e.g.by touching an unpainted metal part of the controller casing).

► Always use an earthed soldering iron if you carry out any soldering work.

1.3.3.5 Dispatching ESD modules

► Always store modules and components in conductive packaging (e.g. metallized plastic bags

or metal sleeves) and dispatch them in conductive packaging

► If the packaging is not conductive, place the modules in a conductive envelope before pack-

aging. Use conductive expanded rubber, ESD bags, domestic aluminum foil or paper, for

example. NEVER use plastic bags or film.

► If the module has integral batteries, ensure that the conductive packaging does not touch or

short circuit the battery terminals and, if necessary, first cover the terminals with insulating

tape or material.

1.3.4 Validity of Document

This document contains instructions for the installation of SIPLACE WPC modules.

The work described in this manual is largely identical for all SIPLACE WPC types:

●

If the work required for specific machines differs from the standard procedure, this will be in-

dicated with reference to the machine number, series and delivery state.

●

Diagrams should be seen as examples e.g. the diagram of a SIPLACE WPC5 or a different

paint finish does not mean that the following information only applies to the type shown.

Review

1 Introduction

1.4 Abbreviations

Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X

Series S 03/2020

1.3.5 Release History

Document

SIPLACE WPC5 on SIPLACE X-Series S

Assembly Instructions

Release Amendments

08/2014 Initial release

03/2020 Amendments, supplements:

●

Scope of delivery

●

Supplement in annex: dismantling the side covers, nozzle changer, detailed

circuit diagrams SIPLACE X-Series S (from Hxxxx) [DE EN: 00197920‑xx]

1.4 Abbreviations

Abbreviations Description

PA, PA1, PA2 Placement area, Placement area 1, Placement area 2

CO Component

COT Changeover table

COT-i Changeover table insert

C&P Collect&Place

CPP Collect&Pick&Place head

CPx Collective term for CPP, CP20, CP12 and/or CP6

DC Dual conveyor with two lanes

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

SC Single conveyor with one lane

PCB Board

MTC Matrix Tray Changer

P&P Pick&Place

NC Nozzle changer

SC Station computer

TH TwinHead

WPC Wafflepack changer

WPC4/5/6 Wafflepack changer version 4/5/6

Review

1 Introduction

1.4 Abbreviations

62 Assembly Instructions / Montageanleitung SIPLACE WPC an SIPLACE X-Serie S SIPLACE WPC on SIPLACE X

Series S 03/2020