N7201A617E00_0317 - 第135页
NPM-W 2 EJM7DE-MB-04M-00 4-1-1 -4 Every 24 hours Periodic Periodic inspection
NPM-W2 EJM7DE-MB-04M-00
Before
opera-
tion
4-1-1-3
Maintenance
4-1-1
Check the air pressure (Main air pressure)
Tool used: Allen wrench (3 mm) Time required: 3 minutes
●Adjust when the main air pressure is out of the required value range.
Inspecting the
pressure gauge 2
Rear side
1
Remove the bolts and remove
the rear pressure gauge cover
2
Adjust the pressure to be
within the range
Main air
regulator knob
●How to operate the regulator knob
1: Pull the knob up
2: Adjust it
3: Pull it down
3
Attach the rear pressure
gauge cover
●Bolt: Two locations
Rear
pressure
gauge cover
●Bolt: Two locations
●Remove bolts
NPM-W2 EJM7DE-MB-04M-00
4-1-1-4
Every
24
hours
PeriodicPeriodic
inspection
NPM-W2 EJM7DE-MB-04M-00
4-1-1-5
Adjusting the air pressure (pressure of cleaning blow , line camera air and vacuum break )
Tool used: Phillips screwdriver (No.2), spanner (10 mm) Time required: 5 minutes
●Adjust when the cleaning blow pressure and line camera air pressure is out of required value range.
Before
opera-
tion
Maintenance
4-1-1
Inspecting the
pressure gauge 3
1
3
Front side
Attach the cover inside
of the cart
■Image as seen from the
arrow direction
6
9
7
Remove the
feeder cart
(→P.3-2)
Attach the feeder
cart (→P.3-2)
●Screw: Four locations
●Tighten screws
Cover
OFF
SERVO
2
SERVO
ON
8