N7201A617E00_0317 - 第210页
NPM-W 2 EJM7DE-MB-06M-00 6-8 -1 Maintenance 6-8 Inspecting the saf ety s witches Describes how to check the emergency stop switch. Tool used: None Time required: 2 minutes ● Origin return should be performe d in advance.…
NPM-W2 EJM7DE-MB-06M-00
4
Remove the filter
from the cover
and clean it
●Use an air blow gun.
●Do not use an organic
solvent.
Filter
5
Attach the filter
to the cover
Take out the filter element to clean
①Disassemble the filter unit.
②Eliminate dirt on the filter
element with an air blow
gun.
(No organic solvent should
be used)
③Put the filter unit back
together.
6
Head
Filter element
O-ring
Filter case
Ring
Vacuum pump
6-7-2
3
Detach the cover
Cover
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
(Rear)
●Six screws
NPM-W2 EJM7DE-MB-06M-00
6-8-1
Maintenance
6-8
Inspecting the safety
switches
Describes how to check the emergency stop switch.
Tool used: None Time required: 2 minutes
●Origin return should be performed in advance.
Checking the emergency stop switch
1
Press the emergency stop switch
on the front side
3
Press the emergency stop switch
on the rear side and make sure
the screen changes to the one
shown on the left as in the case
of the front side
2
Make sure the screen changes to the one
shown on the left.
Make sure the screen changes to the one
shown on the left.
2
+
NPM-W2 EJM7DE-MB-06M-00
6-8-2
Describes how to check the safety switch (safety cover).
Tool used: None Time required: 2 minutes
Perform steps through at the front of the machine, and for step , perform at the rear.
1
2
(The [Input confirm]screen is displayed.)
3
Press once.
431
1
2
4
Checking the safety switch (safety cover)
3
Open the safety cover on the
front side and be sure that the
display color of
・[Safety cover 1] and
・[Safety cover 3]
changes from light blue to gray.
4
Open the safety cover on the
rear side and be sure that the
display color of
・[Safety cover 2] and
・[Safety cover 4]
changes from light blue to gray.
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection