N7201A617E00_0317 - 第222页

NPM-W 2 EJM7DE-MB-06 M-00 This s ection explai ns the proc edure for a single tra y feeder. F ollow the same pro cedure for a twin tray fee der. Tool used: Grease gun Time required: 20 minutes for a single tray feede r, …

100%1 / 572
NPM-W2 EJM7DE-MB-06M-00
6-12-2
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
NPM-W2 EJM7DE-MB-06M-00
This section explains the procedure for a single tray feeder. Follow the same procedure for a twin tray feeder.
Tool used: Grease gun Time required: 20 minutes for a single tray feeder, 40 minutes for a twin tray
feeder
Greasing to the tray
feeder
(option) 1
6-13-1
Maintenance
6-13
OFF
SERVO
OFF
SERVO
SERVO
ON
7
8
1
2
3
9
11
10
For a twin tray
feeder, select a
table
or
ENABLING
(The tray feeder drawer
moves to the maintenance
position.)
ENABLING
Open the magazine
cover and remove the
upper magazine
(→[Operating procedure]
P.2-4-2)
Push the X-axis
inward
NPM-W2 EJM7DE-MB-06M-00
To
12
6-13-2
4
5
6
Apply grease via grease nipples to the
vertical-axis ball screw and the linear guide for
the lifter
Ball screw
Grease nipple
●Apply grease via grease nipples
with a grease gun.
Give two pumps for each
(Approx. 1.8 cm
3
)
●Grease: LCG100
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection