N7201A617E00_0317 - 第230页

NPM-W 2 EJM7DE-MB-06 M-00 Attach the feeder cart ( → P.3-2) Gr easing the cutting unit 6-17 -1 Tool used: Grease gun Time required: 3 minutes 1 2 Apply grease to the linear guides, bearings and guide blocks ● Apply greas…

100%1 / 572
NPM-W2 EJM7DE-MB-06M-00
6-16-2
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
NPM-W2 EJM7DE-MB-06M-00
Attach the
feeder cart
(→P.3-2)
Greasing the cutting
unit
6-17-1
Tool used: Grease gun Time required: 3 minutes
1
2
Apply grease to the linear guides, bearings and guide blocks
●Apply grease via the grease nipple. (three locations)
・Linear guide
・Bearing
・Guide block
(Use the grease gun. About 0.9 cm
3
per pump)
●Grease: LCG100
3
Detach the feeder
cart
(→P.3-2)
Grease nipple
Feeder cart (option)
Grease nipple
Grease nipple
Front
Right side
Right side greasing point
Maintenance
6-17
NPM-W2 EJM7DE-MB-06M-00
6-17-2
1
Apply grease to the guide block
●Apply grease to the guide block via the grease nipple. (two locations)
(Use the grease gun. About 0.9 cm
3
per pump)
Grease: LCG100
Tool used: Grease gun Time required: 3 minutes
13-slot feeder unit (option)
Grease nipple
Grease nipple
Guide block
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection