N7201A617E00_0317 - 第233页
NPM-W 2 EJM7DE-MB-06M-00 6-18 -2 Every 560 hours Periodic Periodic Periodic Periodic inspection
NPM-W2 EJM7DE-MB-06M-00
6-18-1
Maintenance
6-18
Attach the feeder
cart
(→ P.3-2)
8
Cleaning the light-emitting
and light-receiving sections
(height sensor(option))
3
Cleaning the light-emitting and
light-receiving sections
●Wipe off with a soft lint free cloth.
(If this part gets scratched, the
height sensor may not function
properly)
Describes cleaning of the light-emitting and light-receiving sections of the height sensor (option).
Tool used: Lint free cloth, Time required: 5 minutes per location
4
Push the Y-axis
beam inward
OFF
SERVO
1 2 3
Detach the
feeder cart
(→P.3-2)
5
6 7
(Picture seem from below)
Light-emitting
and light-
receiving
sections
NPM-W2 EJM7DE-MB-06M-00
6-18-2
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
NPM-W2 EJM7DE-MB-06M-00
6-19-1
Greasing the
dispensing head (option) 1
Maintenance
6-19
Describes how to grease to the ball screw and the linear guide on the dispensing head.
Tool used: Grease gun, lint free cloth, gloves Time required: 30 minutes (per location)
Ball screw greasing point
Linear guide greasing point
●A part of the model is omitted for explanations.
Personnel with pacemakers should keep away from the linear
motor
(Risk of accidents caused by errors in operation due to magnetic force)
WARNING