N7201A617E00_0317 - 第244页
NPM-W 2 EJM7DE-MB-06M-00 Maintenance 6-22 Cleaning the XY -axis ca ble bear er 1 OFF SERVO 3 2 9 7 SERVO ON 8 6 6-22 -1 Detach the feeder cart ( → P.3-2) Attach the feeder cart ( → P.3-2) Describes how to clean cable bea…
NPM-W2 EJM7DE-MB-06M-00
6-21-4
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
Wipe the nozzle changer upper surface
6
●Do not leave behind any contamination on the face
in contact with the nozzle flange.
●Wipe the inside with a swab and wipe the surface
with a lint free cloth.
●Confirm that there are no foreign objects jammed
inside the opening between the nozzle changer
upper cover and its upper surface.
Nozzle changer
Lint free cloth
4
Remove the support pin nozzle
5
Push the Y-axis
inward
NPM-W2 EJM7DE-MB-06M-00
Maintenance
6-22
Cleaning the XY-axis
cable bearer
1
OFF
SERVO
3
2
9
7
SERVO
ON
8
6
6-22-1
Detach the feeder
cart
(→P.3-2)
Attach the
feeder cart
(→P.3-2)
Describes how to clean cable bears on the X-axis and Y-axis.
Tool used: Lint free cloth
Time required: 10 minutes
Move the placement head
and X-beam to the
position where they do
not hit the mechanical
stopper
NPM-W2 EJM7DE-MB-06M-00
Every
560
hours
PeriodicPeriodicPeriodicPeriodic
inspection
6-22-2
Clean the cable bear on the X-axis
4
●Move the placement head in the X-
direction and wipe off any adhesion on the
cable bear using a lint free cloth.
●Move the placement head to the right and
wipe off any dust on the bracket using a
lint free cloth.
5
Clean the cable bear on the Y-axis
●Move the X-axis beam in the Y-direction
and wipe off any adhesion on the cable
bear using a lint free cloth.
●Push the X-axis beam inward and wipe off
any dust on the bracket using a lint free
cloth.
Bracket
Bracket