N7201A617E00_0317 - 第262页
NPM-W 2 EJM7DE-MB-08 M-00 8-1 -1 Tool used: Allen wrench(4 mm) and vacuum cleane r Time required: 20 minutes Cleaning the filter (main controller) Maintenance 8-1 6 2 7 Attach the filter ● Put the filter between the spri…
8 Periodic inspection
Every-3000-hours
NPM-W2 EJM7DE-MB-08M-00
8-1-1
Tool used: Allen wrench(4 mm) and vacuum cleaner Time required: 20 minutes
Cleaning the filter
(main controller)
Maintenance
8-1
6
2
7
Attach the filter
●Put the filter between the springs.
●Hold the handle of the spring and push it
all the way into until the projection A is hooked.
Attach the
cover
● Seven screws
Detach the
feeder cart
(→P.3-2)
1
5
Remove dust
attached to
the filter
Spring
Filter
8
Attach the
feeder cart
(→P.3-2)
9
(Front side)
(Front side)
4
Turn OFF the
power and lock
the machine
OFF
ON
Unlock the
machine and
Handle
NPM-W2 EJM7DE-MB-08M-00
3
Remove the cover
●Five screws
4
Remove the filter
Main controller
Handle
●Pull it forward with holding
the projection A.
Projection
A
8-1-2
(Front side)
Every
3000
hours
PeriodicPeriodicPeriodicPeriodicPeriodic
inspection