N7201A617E00_0317 - 第308页

NPM-W 2 EJM7DE-MB-12M-00 12-1 -3 ■ Single conveyor: 8 belts ■ Dual conveyor: 6 belts on each lane Hook a new belt ● Loosen screws of the tension pulley in advance. (Four on each) ● Loosen screws of the tension pulley in …

100%1 / 572
NPM-W2 EJM7DE-MB-12M-00
8
Remove the belt
●Remove it, pulling out towards you.
●If disposing of the belt, you may
cut it with a wire cutter or nippers
to remove.
Belt
Movable side
Fixed side
■Single conveyor: 8 belts
■Dual conveyor: 8 belts on each lane
Movable side
Fixed side
Movable side
Fixed side
Lane 1
Lane 2
To
9
Consumable parts
replacement
12-1-2
NPM-W2 EJM7DE-MB-12M-00
12-1-3
■Single conveyor: 8 belts
■Dual conveyor: 6 belts on each lane
Hook a new belt
●Loosen screws of the tension pulley in advance. (Four on each)
●Loosen screws of the tension pulley in advance. (Four on each)
●About the front and rear sides of the belt
Front side: No letter printed
Rear side: Letters are printed
●Install the belt so the belt front side shall be the PCB transfer side.
9
Fixed rail：4 belts
Movable rail：4 belts
A
B
C
D-1
D-2
A
B
C
Tension pulley Tension pulley
Tension pulley Tension pulley
Lane 1, Lane 2 Fixed rail：8 belts
A
B
A
B
C
D-1
D-2
C
C
D-2
D-1
C
Tension pulley
Tension pulley
Tension pulley
Tension pulley
Tension pulley
Tension pulley
Type Location No.
Belt
length
[mm]
Product No.
Common to both
single conveyor and
dual conveyor
Fixed rail
A 927 N510063692AA
B
1314.5 N510060975AA
Movable rail
C
727.5 N510060980AA
D-1
1174.5 N510060976AA
D-2
Replacing the transfer belt of
the PCB transfer conveyor 2
Maintenance
12-1
Lane 1 Movable rail：4 belts (Arrow E in P.12-1-4)
Lane 2 Movable rail：4 belts (Arrow F in P.12-1-4)
NPM-W2 EJM7DE-MB-12M-00
12-1-4
10
Adjust the belt
tension
(→ P.6-5)
13
Attach the feeder
cart (→P.3-2)
14
15
Check the PCB
transfer
11
Unlock the
machine and
ON
(→[Operating Procedure]
P.2-5-5)
E
F
Movable side
Fixed side
Movable side
Fixed side
Lane 1
Lane 2
Consumable parts
replacement
12
Place the feeder
table cover
(→P.3-3)
Attach the
clamper
●Screws(5)
●Arrows of PCB conveyor movable rail in step ⑨
●Be careful not to drop
screws