N7201A617E00_0317 - 第360页
NPM-W 2 EJM7DE-MB-13M-00 2 Choose a head to perform plane correction Z + (The head moves to the work position) 2 Explains the method for calibrating the plane correct io n Z, taking for an example, the 12-nozzle head ; h…
NPM-W2 EJM7DE-MB-13M-00
13-3-6
Calibration
NPM-W2 EJM7DE-MB-13M-00
2
Choose a head to perform
plane correction Z
+
(The head moves to the work position)
2
Explains the method for calibrating the plane correction Z, taking for an example, the 12-nozzle head;
however, the same method can also be applied to the light weight 16-, 8-, and 3-nozzle heads.
Placement head 1
3
4
1
4
13-4-1
1
3
Choose nozzle positions to
measure the height
●On the default screen, all the nozzle
positions are selected. If there is a
nozzle position which you do not wish
to calibrate, deselect it by pressing its
box.
or
Maintenance
13-4
Head / Plane
calibration Z 1
NPM-W2 EJM7DE-MB-13M-00
5
6
Servo switch OFF
Open the safety cover
Prepare for height
measurement
7
Install nozzles to the nozzle
positions selected in step
8
3
10
Servo switch ON
Close the safety cover
9
11
(The height measurement is completed)
+
Confirm the message
●To cancel
(The screen remains as it is in )
3
11
13-4-2
●Nozzle used
Head type Nozzle type
16
230CS
12
8 230C
3 1002
Calibration