N7201A617E00_0317 - 第369页
NPM-W 2 EJM7DE-MB-13M-00 13-4 -10 Calibration
NPM-W2 EJM7DE-MB-13M-00
13-4-9
Maintenance
13-4
Head / Plane
calibration Z 5
Dispensing head 2
11
11
Confirm that it has been
successfully completed
12
13
(The head moves to the work position)
+
Confirm the message
12
Confirm the message
(The plane correction Z data is saved)
ATTENTION
When this calibration is performed, adhesives may stains to the reference post or on
the rail. If so, please wipe it off with a cloth.
NPM-W2 EJM7DE-MB-13M-00
13-4-10
Calibration
NPM-W2 EJM7DE-MB-13M-00
Width adjustment
1
4
3
2
+
(The conveyor width is adjusted to the
reference width of 550 mm.)
Open the safety cover
Measure the conveyor width
with a vernier caliper
5
6
Close the safety cover
1
13-5-1
Explains the method for calibrating the width adjustment of the transfer conveyor.
Maintenance
13-5
Servo switch OFF
Servo switch ON