N7201A617E00_0317 - 第417页

NPM-W 2 EJM7DE-MB-13M-00 13-10 -10 Calibration

NPM-W2 EJM7DE-MB-13M-00

Jig station 5

13-10-9

Maintenance

13-10

For abnormal end

When calibration abends, the following screen is displayed. The calibration results are not saved.

(Returns to the calibration screen and

shows the values prior to calibration)

NPM-W2 EJM7DE-MB-13M-00

13-10-10

Calibration

NPM-W2 EJM7DE-MB-13M-00

Split recognition (option) 1

This is used when the component to be recognized is larger than the standard one. The image is split and

recognized, and the correction value is calculated and PCB is mounted. (for 3-nozzle head only)

●QFP, connector X-direction: to 145.2 mm, Y-direction: 45 to 80 mm

●Components other than the above, X-direction: to 145.2 mm, Y-direction: 45 to 90 mm

13-11-1

Maintenance

13-11

Select a table

Select a nozzle

Select a nozzle to measure.

Confirm that the servo switch

is ON

(If OFF, change to ON)

(Select 3-nozzle head only)