N7201A617E00_0317 - 第422页
NPM-W 2 EJM7DE-MB-13M-00 Dispensing head 1 ● Install the screw unit that a calibra tion nozzle (nozzle no. 72 02) is previously set, and fill up adhesives by Eject Confirm in advance. ( → [Oper ating proc edure] P.3-4) 1…
NPM-W2 EJM7DE-MB-13M-00
13-11-4
22
21
19
23
Remove the multi-recognition
camera jig
The selected menu (other
menu) is displayed
20
20
Confirm the message
■When you do not remove the multi-
recognition camera jig
(The screen remains as it is in )
14
Calibration
Close the safety cover
Servo switch ON
NPM-W2 EJM7DE-MB-13M-00
Dispensing head 1
● Install the screw unit that a calibration nozzle (nozzle no. 7202) is previously set, and fill up adhesives by
Eject Confirm in advance. (→[Operating procedure] P.3-4)
13-12-1
Maintenance
13-12
1
1
2
Choose a table
2
3
Choose a head position
3
5
4
Choose whether dummy
dispensing enables or not
4
+
5
6
Confirm the message
+
(Calibration is carried out)
6
NPM-W2 EJM7DE-MB-13M-00
Confirm that it has been
successfully completed, and
choose the other head
positions for plane correction
Z and then repeat steps from
to .
7
Confirm that it has been
successfully completed
+
8
3 7
9
13-12-2
(Calibration is carried out)
(The confirmation scree of data save
appears)
7
8
9
10
Confirm the message
7
10
(The data obtained by calibration is
saved)
Calibration