N7201A617E00_0317 - 第438页
NPM-W 2 EJM7DE-MB-13M-00 Ima ge quality cor r ection (2D inspection head) 13-16 -1 Maintenance 13-16 The inspection hea d measures solder and compone nt positions based on an image capture d by the color camera. This fun…
NPM-W2 EJM7DE-MB-13M-00
13-15-3
9
9
10
Confirm the message
10
Calibration
(The data obtained by calibration is
saved)
NPM-W2 EJM7DE-MB-13M-00
Image quality correction
(2D inspection head)
13-16-1
Maintenance
13-16
The inspection head measures solder and component positions based on an image captured by the color
camera. This function corrects distortion of the camera image in order to make a precise measurement.
The distortion correction plate is used for image correction. The machine corrects the camera image based
on the measurement result using this jig that its accuracy is guaranteed.
1
2
5
4
3
Check a calibration jig and a
distortion correction plate
Close the safety cover
Open the safety cover
Servo switch ON
Servo switch OFF
Distortion correction plate
Calibration jig
●When calibration is carried out, make
sure that the calibration jig is securely
tightened and the distortion correction
plate is not dirty. If it is dirty, clean it
with a blower brush.
NPM-W2 EJM7DE-MB-13M-00
13-16-2
6
7
8
Choose a table
+
6
8
(The head operates to measure the
distortion)
Confirm that it has been
successfully completed
Calibration
7
●If an error occurs, check if the
distortion correction plate is dirty. If it
is dirty, clean it with a blower brush
and then try making measurement
again.
●If you fail to correct the error with the
above method, contact us.