N7201A617E00_0317 - 第445页

NPM-W 2 EJM7DE-MB-13M-00 Install the pickup position height teaching jig 13-18 -4 (Calibration is carried out) ■ To cancel (The screen remains as it is in ) 3 Confirm the message + Calibration 14 15 15 Place the jig to t…

100%1 / 572
NPM-W2 EJM7DE-MB-13M-00
13-18-3
Install the pickup position
height teaching jig
(Calibration is carried out)
■To cancel
(The screen remains as it is in )
3
Confirm the message
Pickup position height
teaching jig
+
Maintenance
13-18
Pickup position 2
12
13
11
13
+
11
Set the jig to the No. 19 slot located on the right side.
Set the jig to the No. 2 slot located on the left side of
the table selected in step .
1
No. 19 slotNo. 2 slot
■For a 13-slot feeder
■For a feeder cart
NPM-W2 EJM7DE-MB-13M-00
Install the pickup position
height teaching jig
13-18-4
(Calibration is carried out)
■To cancel
(The screen remains as it is
in )
3
Confirm the message
+
Calibration
14
15
15
Place the jig to the No. 15 slot located at the center of
the table selected in step .
Set the jig to the No. 24 slot located on the right side.
1
■For a 13-slot feeder
■For a feeder cart
No. 24 slotNo. 15 slot
NPM-W2 EJM7DE-MB-13M-00
Install the pickup position
height teaching jig
13-18-5
Confirm that it has been
successfully completed
●Repeat steps from to
from the other table.
1
■To cancel
(The screen remains as it is
in )
3
Confirm the message
+
Maintenance
13-18
Pickup position 3
16
18
19
17
17
1819
17
●Set the jig to the No. 29 slot located
on the right side of the table selected
in step .
(Set the jig to the same slot for both
the feeder cart and the 13-slot feeder)
1
No. 29 slot