N7201A617E00_0317 - 第452页
NPM-W 2 EJM7DE-MB-13M-00 (Pickup position 2 is calibrated) Confirm that it has been successfully completed + ● For a recognitio n error, 13-19 -3 Tr a y 2 or + + Confirm that it has been successfully completed Change to …
NPM-W2 EJM7DE-MB-13M-00
Close the safety cover
Install nozzles for the nozzle
changer
■To cancel
(The screen remains as it is
in )
(The nozzle pickup height is measured)
13-19-2
●Nozzle used
Head
type
Changer
position
Nozzle
type
8
No. 11
230C
3 1002
+
(Pickup position 1 is calibrated)
Confirm that it has been
successfully completed
8
7
6
9
2
9
10
10
Calibration
Confirm the message
+
Servo switch ON
NPM-W2 EJM7DE-MB-13M-00
(Pickup position 2 is calibrated)
Confirm that it has been
successfully completed
+
●For a recognition error,
13-19-3
Tray 2
or
+
+
Confirm that it has been
successfully completed
Change to
+
Maintenance
13-19
Using the above buttons, move the
recognition image near the center.
Then, press
11
11
12
12
13
13
NPM-W2 EJM7DE-MB-13M-00
Confirm the message
■When you do not save the data
■To cancel
(The screen remains as it is in )
13-19-4
For the twin tray feeder, choose
the other tray in step and
repeat the steps until
Confirm the message
■To calibrate the tray again
+
(The nozzle is stored to the nozzle
changer No.11)
14
12
14
16
151
15
15
Calibration
Confirm that it is Home screen,
and prepare to remove the
nozzles from the nozzle
changer
17