N7201A617E00_0317 - 第453页
NPM-W 2 EJM7DE-MB-13M-00 Confirm the message ■ When you do not save the data ■ To cancel (The screen remains as it is in ) 13-19 -4 For the twin tray feeder , choose the other tray in step and repeat the steps until Conf…
NPM-W2 EJM7DE-MB-13M-00
(Pickup position 2 is calibrated)
Confirm that it has been
successfully completed
+
●For a recognition error,
13-19-3
Tray 2
or
+
+
Confirm that it has been
successfully completed
Change to
+
Maintenance
13-19
Using the above buttons, move the
recognition image near the center.
Then, press
11
11
12
12
13
13
NPM-W2 EJM7DE-MB-13M-00
Confirm the message
■When you do not save the data
■To cancel
(The screen remains as it is in )
13-19-4
For the twin tray feeder, choose
the other tray in step and
repeat the steps until
Confirm the message
■To calibrate the tray again
+
(The nozzle is stored to the nozzle
changer No.11)
14
12
14
16
151
15
15
Calibration
Confirm that it is Home screen,
and prepare to remove the
nozzles from the nozzle
changer
17
NPM-W2 EJM7DE-MB-13M-00
13-19-5
Tray 3
Open the safety cover
Remove the nozzles from the
nozzle changer No.11
Close the safety cover
Maintenance
13-19
19
20
18
22
21
Servo switch OFF
Servo switch ON