N7201A617E00_0317 - 第474页
NPM-W 2 EJM7DE-MB-13 M-00 1 Upon completion of placement, Checking and reflection of placement (checking placement results) Accuracy verifica- tion 2 (Automatic run ends) + 2 13-21-2 -5 3 4 5 3 4 5 Switch it w ith ■ When…
NPM-W2 EJM7DE-MB-13M-00
Checking and reflection of placement (placement)
ENABLING
321
(First layer)
(Second layer)
13-21-2-4
Calibration
4
Do not press the STOP button
while accuracy verification is
carried out.
You cannot restart operation in
the middle of accuracy
verification.
NOTICE
Confirm the
message
8
7
6
Load glass PCB
●Production starts as the
glass PCB is loaded
upon completion of
production preparation.
If the machine is coupled to
another machine, adjust the PCB
width of the adjacent machine to
216 mm, and load the PCB into
the upstream machine.
NOTICE
ENABLING
5
●The head camera screen
appears and you can view
the part being measured.
●To use accuracy verification
MCDATA:
(→ P.13-21-1
-1 ‘■Reflection
of verification data’)
NPM-W2 EJM7DE-MB-13M-00
1
Upon completion of placement,
Checking and reflection of placement (checking placement results)
Accuracy
verifica-
tion
2
(Automatic run ends)
+
2
13-21-2-5
3
4
5
3
4
5
Switch it with
■When you do not end
Maintenance
13-21-2
Detailed process 3
(placement head)
(→ P.13-21-1-2 ‘■Target value for
accuracy verification’)
NPM-W2 EJM7DE-MB-13M-00
13-21-2-6
8 910
11
8
9
Choose a nozzle to display
(Offset per nozzle is displayed)
Choose a table to display
10
Choose a placed part
●Displayed based on the part type.
B
6
7
A
6
Choose a table
(Displays the accuracy of the front and the
rear individually or the total accuracy)
●Cpk prescribed values per component
(→ P.9-1-1 ‘Basic performance’ in
[Operating procedure] )
A
Cpk
●If the measurement result Cpk is
lower than the prescribed value,
Angle Offset is reflected.
7
■To reflect mount offset
Offset per nozzle is displayed
B
X[mm], Y[mm], θ[°]
■To reflect the verification data
11
■
For
■
For other than
12
13
To
To
Calibration
●Confirm the message
To use accuracy verification MCDATA:
(→ P.13-21-1
-1 ‘■Reflection of verification
data’)