N7201A617E00_0317 - 第475页
NPM-W 2 EJM7DE-MB-13M-00 13-21-2 -6 8 9 10 11 8 9 Choose a nozzle to display (Offset per nozzle is displayed) Choose a table to display 10 Choose a placed part ● Displayed based on the part type. B 6 7 A 6 Choose a table…
NPM-W2 EJM7DE-MB-13M-00
1
Upon completion of placement,
Checking and reflection of placement (checking placement results)
Accuracy
verifica-
tion
2
(Automatic run ends)
+
2
13-21-2-5
3
4
5
3
4
5
Switch it with
■When you do not end
Maintenance
13-21-2
Detailed process 3
(placement head)
(→ P.13-21-1-2 ‘■Target value for
accuracy verification’)
NPM-W2 EJM7DE-MB-13M-00
13-21-2-6
8 910
11
8
9
Choose a nozzle to display
(Offset per nozzle is displayed)
Choose a table to display
10
Choose a placed part
●Displayed based on the part type.
B
6
7
A
6
Choose a table
(Displays the accuracy of the front and the
rear individually or the total accuracy)
●Cpk prescribed values per component
(→ P.9-1-1 ‘Basic performance’ in
[Operating procedure] )
A
Cpk
●If the measurement result Cpk is
lower than the prescribed value,
Angle Offset is reflected.
7
■To reflect mount offset
Offset per nozzle is displayed
B
X[mm], Y[mm], θ[°]
■To reflect the verification data
11
■
For
■
For other than
12
13
To
To
Calibration
●Confirm the message
To use accuracy verification MCDATA:
(→ P.13-21-1
-1 ‘■Reflection of verification
data’)
NPM-W2 EJM7DE-MB-13M-00
13-21-2-7
Checking the placement result (reflection of verification data, offset registration)
Accuracy
verifica-
tion
Detailed process 4
(placement head)
Maintenance
13-21-2
12
(The data is reflected and machine
parameters are updated)
●Regardless of the table
selected for data display
・All heads
・Nozzle offset
are updated.
●It can be replaced so that you can check the placement accuracy.
In doing so, please do [Checking the placement result] on P.13-21-2
-8.
NOTE
12
Confirm the message
●For a part up to the size of the 0402
chip
●For a part larger in size than the
0402 chip
Confirm the message
13
●When you do not save the data
13