N7201A617E00_0317 - 第481页
NPM-W 2 EJM7DE-MB-13M-00 Production preparation 3 ( 生産動作の設定 ) Production preparation 3 (Setting of production) 1 T urn OFF all items except [Inspection] and [PCB recog.] 13-21-2 -12 1 Calibration
NPM-W2 EJM7DE-MB-13M-00
7
6
Close the safety cover
Servo switch ON
②Set FIXED RAIL SIDE(TYPE A) of the
plane correction jig to the reference rail
side.
③Press the jig against the reference rail.
Reference hole(φ1 mm)
Accuracy
verifica-
tion
Detailed process 6
(inspection head)
Maintenance
13-21-2
13-21-2-11
■When setting to the second placement position
Plane correction jig
Operator
Plane
correction
jig
Right edge
of plane
correction
Jig
①
Reference rail
FIXED RAIL
SIDE(TYPE A)
NOTICE
●The reference hole for the plane correction differs
from the one for accuracy verification. Be sure to
use the correct one.
NPM-W2 EJM7DE-MB-13M-00
Production preparation 3 (生産動作の設定)
Production preparation 3 (Setting of production)
1
Turn OFF all items except
[Inspection] and [PCB recog.]
13-21-2-12
1
Calibration
NPM-W2 EJM7DE-MB-13M-00
Checking and reflection of measurement (measurement)
ENABLING
321
(First layer)
(Second layer)
Do not press the STOP button while accuracy verification is carried out.
You cannot restart operation in the middle of accuracy verification.
NOTICE
6
Measure the
plane correction
jig
●Measure the jig in
automatic operation. After
the measurement ends
and the its operation stops,
end the automatic
operation
4
Confirm the
message
ENABLING
5
●To use accuracy verification
MCDATA:
(→ P.13-21-1
-1 ‘■Reflection
of verification data’)
13-21-2-13
Accuracy
verifica-
tion
Detailed process 7
(inspection head)
Maintenance
13-21-2