N7201A617E00_0317 - 第522页
NPM-W 2 EJM7DE-MB-14M-00 14-9 -2 Maintenance 14-9 Specifications of peripheral equipment Descr ibes the specific ations required for the per ipheral equipment. ■ Display ● Resolution ： 1024 × 768 or higher ● Display colo…
NPM-W2 EJM7DE-MB-14M-00
14-9-1
2D inspection head 1
(option)
Maintenance
14-9
Overview of peripheral equipment
This section describes the peripheral equipment that can be connected to the machine equipped with the
2D inspection head.
●Attachment/Detachment of 2D inspection head, inspection box, calibration jig, and safety cover is
conducted by our service personnel. Please contact us when necessary.
The following equipment can be connected to a machine with the 2D inspection head.
Peripheral equipment and connecting cables are to be prepared on your own.
Display Being connected to the inspection box, it displays the NG map that
shows which part of PCB is judged as NG.
Keyboard and mouse When it is connected to the inspection box, you can check/exit the NG
map on the display and perform display-related operations.
To connect both the keyboard and the mouse, USB HUB is required,
which should be obtained separately.
Network When the inspection box is connected to PCs running LWS and the
NPM-DGS system via a network, data can be created and modified on
the PCs using the image data of the inspection-target PCB sent from the
inspection box.
Do not connect the inspection box to a network other than the one LWS
is connected to.
Installation
NPM-W2 EJM7DE-MB-14M-00
14-9-2
Maintenance
14-9
Specifications of peripheral equipment
Describes the specifications required for the peripheral equipment.
■Display
●Resolution ： 1024×768 or higher
●Display color ： Approximately 16770000 colors or more
●Image input signal ： Analog RGB
●Connecting cable ： 5 m or less in length
A 75 coaxial cable is recommended for each of the R, G, and B signal lines.
The shape and pin arrangement of the connector ‘MONITOR’ on the inspection box connecting the display are
as follows.
Terminal No. Signal name Pin connection
1GRED
2 GREEN
3GBLUE
4NC
5GND
6GND
7GND
8GND
9 VP50
10 GND
11 NC
12 SDA-10
13 GHSYNC+10
14 GVSYNC+10
15 SCL-10
Connector: Mini D-sub 15 pin (Female)
■Keyboard
●Language ： English or Japanese
●Applicable OS ： Windows XP
●Connection interface ： USB 1.1 / 2.0
●Connecting cable ： Certified according to the USB standards of the keyboard to use
5 m or less in length
*The maximum current derived from the USB connector on the inspection box is 500 mA (DC+5V).
2D inspection head 2
(option)
NPM-W2 EJM7DE-MB-14M-00
■Mouse
●Applicable OS ： Windows XP
●Connection interface ： USB 1.1 / 2.0
●Connecting cable ： Certified according to the USB standards of the mouse to use
5 m or less in length
*The maximum current derived from the USB connector on the inspection box is 500 mA (DC+5V).
■Network
●LAN type ： IEEE802.3ab(1000BASE-T)
Use connecting cables and network equipment that comply with the above
standards.
14-9-3
Installation