N7201A617E00_0317 - 第54页
NPM-W 2 EJM7DE-SF-01N-0 0 ■ Keep magnetic bodies such as iron (e.g. tools, jigs, and bolts), watches, cellular phones, and magn etic cards 40 mm away from the linear motors. ● Depending on the s hapes of magnetic bodies,…
NPM-W2 EJM7DE-SF-01N-00
1-4-2
Precautions for Maintenance and Inspection
■Follow the instruction manual when engaged in maintenance or
inspection.
●Refer to the Operating procedure and the Maintenance, which come with equipment, for maintenance and
inspection.
●Turn OFF the main power switch and the pneumatic source (cock) before maintenance or inspection.
Locking is recommended to ensure your safety.
●When cleaning parts of the equipment not mentioned in the instruction manual, wipe with a soft dry cloth.
For dirty spots, dampen a cloth with a neutral detergent diluted with water, and wipe the spots after
wringing out the wet cloth.
After cleaning with the damp cloth, dry with a dry cloth.
●When cleaning inside the clean room, use cleaning implements provided for the clean room.
●Do not use an organic solvent or the like because it contributes to the following.
・Cracking or deterioration of plastic parts
・Rapid decline in antistatic effect
■Clean the area around equipment when the equipment is not in use.
When cleaning equipment, be sure to turn the power source off and
do not use an air gun.
●The unit and products may be exposed to dust, thereby causing adverse influence on equipment and
products.
Security precautions
●Machine password is not set as default. Please set a password after the machine is delivered to you.
●After performing operation that password entry is required, change the mode to the normal mode
(Operator mode.)
●Connect the machine, LNB and NPM-DGS to intranet before use.
●Keep your password safe and should not disclose it to any other person.
●When you send or dispose of the computer used for the LNB or NPM-DGS, remove the hard disk or
initialize it.
●When an SD card is used in emergency operation such as network error, delete the data in the SD card
after returning to normal operation.
●Recorded information on the SD card may not be completely deleted by the basic function of the
operation system. We recommend to use commercial software that can delete the data completely.
●If you do not follow above precautions, you may crack a user ID, your password or your production
data by the third parity with knowledge.
Confirmation
NPM-W2 EJM7DE-SF-01N-00
■Keep magnetic bodies such as iron (e.g. tools, jigs, and bolts),
watches, cellular phones, and magnetic cards 40 mm away from the
linear motors.
●Depending on the shapes of magnetic bodies, they may not be able to be detached from each
other. Such as small parts can be removed by hand. (There is no problem if you touch the
permanent magnets with bare hands.)
●Due to extreme powerful magnetic force, watches and cellular phones may be broken and data of
magnetic cards may be corrupted.
Handling of linear motors
Precautions 2
1-4
1-4-3
NPM-W2 EJM7DE-SF-01N-00
1-4-4
Confirmation
Handling of the scanner (option)
■Do not peer into the alignment beam from the scan window.
●The eyes may be damaged by the alignment beam (laser beam).
●When there are changes in subject, the alignment beam is emitted automatically.
And then, when there are no change in it for two seconds, the alignment beam stop emission.
The wired and wireless scanners comply with IEC60825-1 Class2 laser product.
Alignment beam
(Shape of irradiated subject)
■Keep the connector on the NPM-W2 main unit connected as possible
except when necessary.
●If you frequently mate/unmate the connector on the NPM-D3 main body, communication trouble may occur.
●If you connect/disconnect the connector by necessity, be sure to turn OFF the machine power.
Wired scanner Wireless scanner
■Do not emit the alignment beam toward other peoples’ eyes.
●The eyes may be damaged by the alignment beam (laser beam).
■Do not disassemble the scanner.
●The alignment beam is emitted to your eyes when it is disassembled. The eyes may be damaged.