N7201A617E00_0317 - 第73页

NPM-W 2 EJM7DE-SF-01N-0 0 1-9-3 -2 Confirmation Recognizes components. Y -axis driv e unit Drives the placeme nt head Y-dir ection. Placement head The nozzles are picked up components at the component supply pos ition an…

100%1 / 572
NPM-W2 EJM7DE-SF-01N-00
Com-
ponent
names
Main units 1
1-9-3-1
1-9-3
PCB holder
Keeps back side of a PCB with the support blocks and pins.
Extension conveyor (single/dual)
When the machines are coupled as the purpose below, the
extension conveyors are required to be installed at the right and
left of the machine.
・PCB length of over 220 mm is wait in the upstream process.
(Install on the upstream machine)
・Safety distance of machine movable parts is ensured.
●Install first and last of the NPM-W2 in line.
Supply unit
Supplies components to be placed.
●The supply types of the rear side varies depending on machine specifications.
Single tray feeder
(Rear side)
Twin tray feeder
(Rear side)
13-slot feeder
(Rear side)
Feeder cart
(Front and rear sides)
Loads, clamps or unloads PCBs.
PCB conveyor
(dual)
(single)
(dual)
(single)
NPM-W2 EJM7DE-SF-01N-00
1-9-3-2
Confirmation
Recognizes
components.
Y-axis
drive unit
Drives the placement
head Y-direction.
Placement
head
The nozzles are picked up
components at the component
supply position and components are
mounted on a PCB.
●Light weight 16-/12-/8-/3-nozzle
head is available.
X-axis
drive unit
Drives the placement
head X direction.
Nozzle changer unit
Stores or exchanges nozzles.
Light weight 16-/12-
nozzle head
8-nozzle head
3-nozzle head
Multi-
recognition
camera unit
Feeder cover
Ensures safety for hazardous
source inside of the machine
when the machine starts up.
NPM-W2 EJM7DE-SF-01N-00
Com-
ponent
names
Main units 2
1-9-3-3
1-9-3
Safety cover (option)
This cover is for ensuring safety by stopping up the
opening in the
machine when the cart or the tray feeder is
unnecessary.
●The safety cover for a rear cover has two types; a
normal safety cover and a safety cover for tray
feeder specification.
Wiping off station
(option)
Wipes the excess of adhesive
off for the tip of the
dispensing nozzle for the stain
prevention to the inside of
the main unit.
Reads, processes,
and recognizes the
image of the
inspection-target
PCB captured by
the inspection head
and outputs the
inspection result.
Inspection box
(option)
■Front side
■Rear side
●Dispensing head
specification,
●2D inspection head
specification)
●Non-head specification
●Dispensing head
specification,
●Non-head specification