N7201A617E00_0317 - 第75页
NPM-W 2 EJM7DE-SF-01N-0 0 1-9-3 -4 Confirmation Dispensing head (option) Applies adhesive to PCBs with high accur acy at the high sp eed. 2D inspection head (option) Captures the conditio n of the inspection-tar get PCB,…
NPM-W2 EJM7DE-SF-01N-00
Com-
ponent
names
Main units 2
1-9-3-3
1-9-3
Safety cover (option)
This cover is for ensuring safety by stopping up the
opening in the
machine when the cart or the tray feeder is
unnecessary.
●The safety cover for a rear cover has two types; a
normal safety cover and a safety cover for tray
feeder specification.
Wiping off station
(option)
Wipes the excess of adhesive
off for the tip of the
dispensing nozzle for the stain
prevention to the inside of
the main unit.
Reads, processes,
and recognizes the
image of the
inspection-target
PCB captured by
the inspection head
and outputs the
inspection result.
Inspection box
(option)
■Front side
■Rear side
●Dispensing head
specification,
●2D inspection head
specification)
●Non-head specification
●Dispensing head
specification,
●Non-head specification
NPM-W2 EJM7DE-SF-01N-00
1-9-3-4
Confirmation
Dispensing head (option)
Applies adhesive to PCBs with high
accuracy at the high speed.
2D inspection head
(option)
Captures the condition of the
inspection-target PCB, and outputs
the captured image to the inspection
box.
●There are two types: the one with
pixel resolutions of 18μm (type A)
and the other with 9 μm (type B).
Dummy dispensing unit
(option)
Rolls up the dummy tape during dummy dispensing.
Calibration jig for the 2D
inspection 2D
(option)
An optical reference plate used
in calibration of the 2D
inspection head.
NPM-W2 EJM7DE-SF-01N-00
1-9-3-5