N7201A617E00_0317 - 第80页

NPM-W 2 EJM7DE-MB-02M-00 P eriodic inspection items by c yc le 1 Every-24-hours (daily) inspection items 2-1-2 -1 Maintenance 2-1-2 The lists below show check and grease locations/info rmation organi zed by cycle. Indica…

100%1 / 572
NPM-W2 EJM7DE-MB-02M-00
Confirming a cycle and details of work, history information
2-1-1-2
Overview
When 80 % of the
maintenance cycle is
reached, a flashing
yellow-colored message
is displayed on the
[Maintenance menu]
screen.
1
4
3
4
5
2
Choose an item that
warning is shown in
the Alarm field.
(Press the ‘OpTime’)
Confirm task details
After maintenance
6
Confirm the message
■To view
maintenance history
B
After
After
3
4
3
5
2 1 2
A
B
A
●Change to another
screen
A
Change to the limited-life
parts screen
NPM-W2 EJM7DE-MB-02M-00
Periodic inspection
items by cycle 1
Every-24-hours (daily) inspection items
2-1-2-1
Maintenance
2-1-2
The lists below show check and grease locations/information organized by cycle.
Indications in the Power field mean as follows: “ON” = inspect with Power ON, “OFF” = inspect with Power
OFF, and “-” = inspect with Power ON or OFF.
■ Types in common
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1 Main body
Main air pressure
(Pressure gauge)
ON
Air pressure
check
(Before operation)
3 4-1-1
Vacuum pump supply pressure
(Pressure gauge)
Vacuum break pressure
(Pressure gauge)
Cleaning blow pressure
(Pressure gauge)
Components-ejection box -
Cleaning
(End of operation)
3 4-2-1
1 4-2-2
2
Feeder cart
(per cart)
Inside of the used-tape box -
Inspection time (min) = 6 + 1 x (the number of feeder carts)
■ Dispensing head (option)
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1 Dispensing head Joint ON
Cleaning
(End of operation)
30 4-2-5
2 Screw unit
Holder inside ON
Cleaning
(End of operation)
Screw ON
Cleaning
(End of operation)
Nozzle tip ON
Cleaning
(End of operation)
Stopper pin ON
Cleaning and
check
(End of operation)
3
Dummy dispensing
unit
Dummy dispensing tape ON
Check (Before
operation)
1 4-1-2
4 Wiping station Cushion (wiping station) ON
Cleaning
(End of operation)
3 4-2-4
Inspection time (min) = 34 x (the number of heads)
Over-
view
NPM-W2 EJM7DE-MB-02M-00
2-1-2-2
Every-140-hours (weekly) inspection items 1
■ Others (Option)
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1 13-slot feeder Inside of the used-tape box
-
Cleaning
(End of operation)
1 4-2-2
2 Tray feeder Refuse box 1 4-2-3
3
Tray feeder pallet
(per pallet)
Pallet
Cleaning, check
(End of operation)
2 4-3-1
■ Types in common
Inspection time (min) = 28 + 30 x (the number of feeder carts )
Overview
Inspection time (min) = 1 x (the number of 13-slot feeder) + 1 x (the number of tray feeders)
+ 2 x (the number of pallets)
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1 Touchscreen Touchscreen face OFF Cleaning 3 5-1
2
PCB conveyor
(single)
PCB-support blocks OFF Cleaning
10
5-3
PCB conveyor
(dual)
10
3
Multi-recognition
camera
Cover glass OFF Cleaning 5 5-4
4
Feeder cart
(per cart)
Feeder table - Cleaning 15 5-5
Connector - Check 15 5-9
5
PCB support block
(standard)
PCB support block OFF Cleaning 10 5-3