N7201A617E00_0317 - 第81页

NPM-W 2 EJM7DE-MB-02M-00 2-1-2 -2 Every-140-hours (weekly) inspection items 1 ■ Others (Option) No. Unit Check and greasing location Power Check and greasing points Time [min] Ref. 1 13-slot feede r Inside of the used-ta…

100%1 / 572
NPM-W2 EJM7DE-MB-02M-00
Periodic inspection
items by cycle 1
Every-24-hours (daily) inspection items
2-1-2-1
Maintenance
2-1-2
The lists below show check and grease locations/information organized by cycle.
Indications in the Power field mean as follows: “ON” = inspect with Power ON, “OFF” = inspect with Power
OFF, and “-” = inspect with Power ON or OFF.
■ Types in common
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1 Main body
Main air pressure
(Pressure gauge)
ON
Air pressure
check
(Before operation)
3 4-1-1
Vacuum pump supply pressure
(Pressure gauge)
Vacuum break pressure
(Pressure gauge)
Cleaning blow pressure
(Pressure gauge)
Components-ejection box -
Cleaning
(End of operation)
3 4-2-1
1 4-2-2
2
Feeder cart
(per cart)
Inside of the used-tape box -
Inspection time (min) = 6 + 1 x (the number of feeder carts)
■ Dispensing head (option)
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1 Dispensing head Joint ON
Cleaning
(End of operation)
30 4-2-5
2 Screw unit
Holder inside ON
Cleaning
(End of operation)
Screw ON
Cleaning
(End of operation)
Nozzle tip ON
Cleaning
(End of operation)
Stopper pin ON
Cleaning and
check
(End of operation)
3
Dummy dispensing
unit
Dummy dispensing tape ON
Check (Before
operation)
1 4-1-2
4 Wiping station Cushion (wiping station) ON
Cleaning
(End of operation)
3 4-2-4
Inspection time (min) = 34 x (the number of heads)
Over-
view
NPM-W2 EJM7DE-MB-02M-00
2-1-2-2
Every-140-hours (weekly) inspection items 1
■ Others (Option)
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1 13-slot feeder Inside of the used-tape box
-
Cleaning
(End of operation)
1 4-2-2
2 Tray feeder Refuse box 1 4-2-3
3
Tray feeder pallet
(per pallet)
Pallet
Cleaning, check
(End of operation)
2 4-3-1
■ Types in common
Inspection time (min) = 28 + 30 x (the number of feeder carts )
Overview
Inspection time (min) = 1 x (the number of 13-slot feeder) + 1 x (the number of tray feeders)
+ 2 x (the number of pallets)
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1 Touchscreen Touchscreen face OFF Cleaning 3 5-1
2
PCB conveyor
(single)
PCB-support blocks OFF Cleaning
10
5-3
PCB conveyor
(dual)
10
3
Multi-recognition
camera
Cover glass OFF Cleaning 5 5-4
4
Feeder cart
(per cart)
Feeder table - Cleaning 15 5-5
Connector - Check 15 5-9
5
PCB support block
(standard)
PCB support block OFF Cleaning 10 5-3
NPM-W2 EJM7DE-MB-02M-00
2-1-2-3
■ 3-nozzle head (option)
■ Others (option)
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1
Nozzle holder
(per head)
Filter OFF Cleaning
30 5-2
Taper surface OFF Cleaning
Clamp claw OFF
Grease
dispensing
(BARRIERTA
IEL/V)
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1
Tray feeder drawer
(per location)
Table surface OFF Cleaning 5 5-6
2
PCB support blocks
(for automatic
change)
PCB-support block (for
automatic change), Support pin
(for automatic change)
OFF Cleaning 10 5-3
3 13-slot feeder
Feeder table OFF Cleaning 15 5-5
Connector - Check 15 5-9
Inspection time (min) = 30 x (the number of heads)
■ Dispensing head (option)
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1
2D-inspection
calibration jig
Calibration plate surface OFF Cleaning 5
5-7
Inspection time (min) = 5 x (the number of calibration jigs )
No. Unit Check and greasing location Power
Check and
greasing points
Time
[min]
Ref.
1
Dummy dispensing
unit
Dummy dispensing plate ON
Cleaning and
inspection
25-8
Inspection time (min) = 2 x (the number of Dummy dispensing units)
Periodic inspection
items by cycle 2
Maintenance
2-1-2
Every-140-hours (weekly) inspection items 1
Over-
view
■ 2D inspection head (option)
Inspection time (min) = 5 x (the number of tray feeders)
+ 10 (with support pin automatic change function installed)
+ 30 x (the number of 13-slot feeder)