00195364-0102_Ext_Power_COT_D1_D2_D3_HF - 第27页

SIPLACE 2 External power supply unit for component trolleys from the SIPLACE D1/D2/D3/HF series 11/2006 Edition 27 2.7 Technical data 2.7.1 Compressed air Input pressure: max. 10 bar (= 1000 kPa) 2 Output pressure: 2.5 b…

2 External power supply unit for component trolleys from the SIPLACE D1/D2/D3/HF series SIPLACE

11/2006 Edition

2.6.3 Changing the fuse

Fig. 7 Power switch with fuses

: Switch the power switch to OFF and make sure that the power plug is not plugged into the de-

vice connector.

: Release the snap closure of the fuse holder by pushing it up and pull the fuse holder and fuses

out of the drawer.

: Remove and check the two fuses and replace them if necessary.

: Only use type 5x20 mm / medium time-lag 6.3 Amp fuses (e.g. 03048168-01).

: Push the fuse holder with the two fuses back into the drawer until the snap closure latches.

Fuse holder

drawer

Power switch

Device plug

Fuses

Fuse holder

Snap closure

SIPLACE 2 External power supply unit for component trolleys from the SIPLACE D1/D2/D3/HF series

11/2006 Edition

2.7 Technical data

2.7.1 Compressed air

Input pressure: max. 10 bar (= 1000 kPa) 2

Output pressure: 2.5 bar (= 250 kPa) 2

2.7.2 Mains connection

2.7.3 Weights / dimensions

Weight: 4.3 kg 2

Dimensions: W x D x H = 180 x 360 x 210 mm 2

Voltage

88 - 264 VAC

Frequency

47...63 Hz

Rated current

5A / 115 VAC 2.5A / 230 VAC

Fuses

6.3A MT (medium time-lag)

2 External power supply unit for component trolleys from the SIPLACE D1/D2/D3/HF series SIPLACE

11/2006 Edition