LmrXP142机械手册.pdf - 第133页

Part 6 Chapter 3 Electrical Power Supply & Transformer W iring Edition 3.0 6-3-1 XP-142E Mechanical Reference 3. Electric Power Supply & T ransformer Wiring Point Wire the transformer inside the machine so that i…

Adjusting the Air Pressure

1. Loosen the screws and open the cover.

2. Raise the regulator knob to unlock it.

Adjust the air pressure to the correct value.

Air pressure: 0.5 MPa

3. Push the knob down to lock it.

4. Close the cover.

XP1MS203E

Knob

Pressure gauge

XP1MC211E

Cover

Part 6 Chapter 2 Connecting the Air

Edition 3.0 6-2-2 XP-142E Mechanical Reference

Part 6 Chapter 3 Electrical Power Supply & Transformer Wiring

Edition 3.0 6-3-1 XP-142E Mechanical Reference

3. Electric Power Supply & Transformer Wiring

Point

Wire the transformer inside the machine so that its voltage matches the supplied voltage.

Power consumption is 4.0 kVA. Ensure that the power supply is equal to or greater than

4.0 kVA.

Procedure

DANGER

Make sure that the external power supply is switched off

before attempting this procedure.

Connecting the Power Supply

1. Detatch the MFU from front side (side 1) of the machine.

2. Turn the breaker switch off. Loosen the cover mounting screws (four) and remove

the cover.

3. Pass the power cable through the cable inlet under the machine to the main switch.

4. Connect the ground wire to the ground terminal.

5. Connect the three-phase wires to the main switch, using the specified screw

tightening torque.

Terminal screw tightening torque: 5.8 N·m

Note: After disconnecting the power supply and confirming that it is off, check the screw

torque periodically.

6. After connecting the wires, fasten them with the cable lock nut.

Cable lock nut tightening torque: 7.5 N·m

14 mm

Ground

Breaker

switch

Cover

Power cable

Main breaker

XP1MS204aE

Recommended driver: Blade 8 X150 mm

Cable clamp

3-phase wire

Wiring the Transformer

1. Remove the transformer box cover.

2. Wire the primary taps to match the supplied voltage.

Transformer box

XP1MS205E

Part 6 Chapter 3 Electrical Power Supply & Transformer Wiring

Edition 3.0 6-3-2 XP-142E Mechanical Reference