LmrXP142机械手册.pdf - 第24页

4. Safety Labels (ESG0601a) To warn the operator of hazards, safety labels are attached to the machine at the positions indicated in the figure below. Familiarize yourself with each label and its message before operating…

100%1 / 145
Safety Guidelines
Edition 3.0 9 XP-142E Mechanical Reference
WARNING
Do not look directly at the strobe light source.
Be sure to wear protective glasses.
● This light source could cause eye damage if looked at directly.
Do not insert hands or other body parts into the
conveyor inlets.
● Body parts may get caught in the machine resulting in injury.
Do not operate the machine when the front/rear cover
has been removed.
● Body parts may get caught in the machine resulting in injury.
Do not disable safety switches and leave safety doors
open.
● Do not operate the machine with the safety switches disabled
(shorted), and the MTU detached. Body parts could become caught
in the machine, resulting in serious injury. After removing the MTU,
be sure to close the safety door.
● Do not short or remove the machine's safety switches. An
operation command could be executed by mistake while the safety
switches are disabled, possibly resulting in serious injury.
Before moving the MFU, be sure that path of movement
is clear of obstacles and persons.
● Careless handling could cause an injury or equipment damage.
Do not move the MFU rapidly or release the handle.
● Careless handling could cause an injury or equipment damage.
4. Safety Labels
(ESG0601a)
To warn the operator of hazards, safety labels are attached to the machine at the
positions indicated in the figure below.
Familiarize yourself with each label and its message before operating the machine.
2
3
4
3
1
6
5
XP1MZ001Ea
3
[High Voltage]
1
2
5
6
4
<
CAUTION
>
The machine may be damaged
if attempting to remove feeders
during operation.
CAUTION
WARNING
Do not bypass the machine safety
devices. Use of the machine without
the safety covers is prohibited.
Safety Guidelines
Edition 3.0 10 XP-142E Mechanical Reference
8
9
1
7
11
XP1MZ002Ea
[High Voltage]
1
8
< WARNING >
DISCONNECT POWER PRIOR TO SERVICING.
9
11
CAUTION
BE SURE TO WEAR THE WRIST STRAP
BEFORE WORKING IN THE CONTROL BOX.
1. TAKE OUT THE WRIST STRAP FROM THE
CONTROL BOX.
2. PUT ON THE WRIST STRAP.
3. START WORK IN THE CONTROL BOX.
7
5.8
Safety Guidelines
Edition 3.0 11 XP-142E Mechanical Reference