LmrXP142机械手册.pdf - 第50页

1.4 Cleaning the Gauge Chip Parts (W eekly) Point The gauge chip part, which is used for nozzle rotation center measurements and mount feedback corrections, is mounted in a prescribed position, and should be cleaned regu…

1.3 Cleaning the Nozzle Interior (Weekly)

Point

Parts are picked up by air suction. Because air is sucked through the nozzle, minute

dust, glue particles, etc., can build up inside the nozzle tube causing clogging. Such

clogging reduces the nozzle suction, causing problems when picking up parts. The

nozzle tube should be cleaned out regularly, or if clogging problems occur.

Procedure

Use a drill bit with the appropriate diameter to remove foreign matter from the nozzle

tube.

Wipe the nozzle tip clean using a cloth soaked in alcohol.

XP1MC203E

Nozzle

Drill bit

Part 3 Chapter 1 Cleaning

Edition 3.1 3-1-4 XP-142E Mechanical Reference

1.4 Cleaning the Gauge Chip Parts (Weekly)

Point

The gauge chip part, which is used for nozzle rotation center measurements and mount

feedback corrections, is mounted in a prescribed position, and should be cleaned

regularly to ensure stable measurements and corrections.

Procedure

WARNING

Cut power to the machine at the main switch before

attempting this procedure.

Wipe the surface with a soft brush (such as is used for camera lenses).

XP1MC204E

Gauge chip parts

Part 3 Chapter 1 Cleaning

Edition 3.1 3-1-5 XP-142E Mechanical Reference

1.5 Cleaning the Vacuum Pump Filter

(Every 3,000 Hours)

Point

The vacuum pump is equipped with a dust filter. This filter should be cleaned/replaced

regularly to ensure stable part pick-ups.

Procedure

1. Remove the MFU from the rear of the machine (side 2).

2. Turn the machine power off.

WARNING

Cut power to the machine at the main switch before

attempting this procedure.

3. Disconnect the air supply, and confirm that the pressure is 0.

4. Remove the cover on the rear of the machine (side 2), as shown in this diagram.

Cover

XP1MC206E

XP1MC205

Part 3 Chapter 1 Cleaning

Edition 3.1 3-1-6 XP-142E Mechanical Reference