LmrXP142机械手册.pdf - 第6页

About This Manual (EMR0004j) This manual contains important machine maintenance information for the operator. The manual content is intended for specialized technicians who are familiar with Surface Mount Technology (SMT…

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual

may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or

reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the

following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,

Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to

any of the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

• Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual

without notice.

• Every effort has been made to ensure that this manual is correct in every detail. However,

please contact Fuji in the unlikely event that errors or omissions are detected.

• Fuji Machine Manufacturing Co., Ltd. accepts no liability whatsoever for damages that may

arise as a result of this manual, with the exception of problems that originate in our products.

(EMR0002b)

About This Manual

(EMR0004j)

This manual contains important machine maintenance information for the operator.

The manual content is intended for specialized technicians who are familiar with Surface

Mount Technology (SMT). Please read this manual carefully in order to ensure safe and

efficient machine maintenance.

Keep this manual close to hand when operating the machine.

Manual Structure

This manual consists of the following eight parts.

Safety Guidelines

Part 1 The Machine

Part 2 Basic Operation

Part 3 Maintenance

Part 4 Adjustments

Part 5 Troubleshooting

Part 6 Setup

Supplementary Information

About This Manual

Edition 3.0 i XP-142E Mechanical Reference

Page Layout

Each page indicates the part number, chapter title, section title , manual name, page

number, and the edition number of the manual.

Part number

The part number to which each chapter belongs is shown on the header on each page.

Chapter number and title

The title of each chapter is shown in the header on each page. Each part may contain one

or more chapters.

Section title

Each chapter may be divided into several sections. The section number is composed of

the number of the chapter to which the section belongs, followed by a sequential number

for each section.

Manual name

XP1MF201E

Body

Edition number

Page number

Section title

Chapter number and title

Part number

1. Leveling the Machine

Point

Set leveling sheets in the positions shown below, and adjust the machine until it is level.

Ensure leveling sheets which conform to the board conveyance height are used.

Procedure

1. Position the leveling sheets according to the positions indicated below.

2. Position a pair of sprit levels on the base of the machine (vertical and horizontal

directions).

3. Adjust the height of each leveling bolt so that the machine is level and the

conveyance height is correct.

4. When you are satisfied that the machine is level, tighten the lock nuts to secure the

leveling position.

XP1MS001

(mm)

293 942 143 4141

5050 278624278

29038

Lock nut

Leveling bolt

Leveling sheet

Table01

Board conveyance height

Leveling sheet height

900

units (mm)

950

965

Part 6 Chapter 1 Leveling the Machine

Edition 2.0 6-1-1 XP-142E Mechanical Reference

About This Manual

Edition 3.0 ii XP-142E Mechanical Reference