LmrXP142机械手册.pdf - 第9页
Notes About This Manual Edition 3.0 iv XP-142E Mechanical Reference
Body
The information needed to understand the workings of the machine and how to perform
maintenance is explained using text and illustrations.
Page number
A three digit hyphenated number appears in the footer on each page. The first digit of
each page number indicates the part number, the second digit indicates the chapter
number within the part, and the final digit is the sequential page number within that
chapter. Page 1-2-1, for example, indicates that this is the first page in the second chapter
of part 1.
Manual name
The name of the manual that appears on the cover is also shown in the footer on each
page.
Edition number
The edition number is updated each time the manual is revised, with the number
reflecting the scale of changes that were made.
Minor revision: Minor changes are reflected in the part of the edition number after
the decimal point, for example, a change from edition 1.0 to 1.1. This
change is made on the revised pages only, and these pages can be
downloaded as required from Fuji's website.
Major revision: If major changes are made, the edition number is increased by one,
for example, a change from edition 1.0 to 2.0. This change is made on
all pages.
Note: The reference numbers at the bottom right of the illustrations are for administrative
purposes only, and are in no way connected to the content of the manual.
System-of-Units Used in This Manual & Conversion Rates
The system-of-units used in this manual, and the conversion rates to other unit systems
are given below.
Manual system-of-units
1 kg = 9.80665 Nkg
Remarks
Conversion to other unit system
Force
Manual system-of-units
1 N·m = 0.10197 kgf·m,
1 N·m = 10.19720 kgf·cm
N·m
Remarks
Conversion to other unit system
Torque
Manual system-of-units
–kPa
Remarks
Conversion to other unit system
Vacuum pressure
–1 kPa = –7.5 mmHg
Manual system-of-units
MPa
Remarks
Conversion to other unit system
Pressure
XP1MF202E
1 MPa = 10.19716 kgf/cm
2
About This Manual
Edition 3.0 iii XP-142E Mechanical Reference
Notes
About This Manual
Edition 3.0 iv XP-142E Mechanical Reference
Contents – List of Current Pages
Safety Guidelines......................................................(Edition 3.0)
1. About Symbols.......................................................................................1
2. Safety Rules for All Machine Types.......................................................2
3. Safety Rules for Individual Machine Types............................................8
XP-1 Series Machines..................................................................................................8
4. Safety Labels.......................................................................................10
5. The EMERGENCY STOP Buttons ......................................................16
Part 1 The Machine
1. Machine Components...........................................(Edition 3.0) ......1-1-1
Machine Front (Side 1)..........................................................................................1-1-1
Machine Rear (Side 2)...........................................................................................1-1-1
Machine Interior.....................................................................................................1-1-2
<For Machines Equipped with a Fixed Device Table on Side 1>.....................1-1-2
Servo Control System............................................................................................1-1-3
MFU-X10E (Option)...............................................................................................1-1-4
2. Functions of Each Component..............................(Edition 3.0) ......1-2-1
Parts Mounting System..........................................................................................1-2-1
Parts Supply System .............................................................................................1-2-1
Vision System........................................................................................................1-2-2
Panel Conveyance.................................................................................................1-2-2
Electrical Control System.......................................................................................1-2-2
Part 2 Basic Operation
1. Changing the Conveyor Width..............................(Edition 3.0) ......2-1-1
2. Changing the Position of the Back-up Pins...........(Edition 3.0) ......2-2-1
3. Using the Maintenance Key..................................(Edition 3.0) ......2-3-1
Part 3 Maintenance
1. Cleaning................................................................(Edition 3.1) ......3-1-1
Cleaning Kit for the Strobe Light Unit ....................................................................3-1-1
1.1 Emptying the Waste Tape Box <if so equipped> (Every 8 Hours) ..................3-1-2
1.2 Emptying the Parts Reject Box and Tray (Everyday) ......................................3-1-3
1.3 Cleaning the Nozzle Interior (Weekly).............................................................3-1-4
1.4 Cleaning the Gauge Chip Parts (Weekly)........................................................3-1-5
1.5 Cleaning the Vacuum Pump Filter (Every 3,000 Hours)..................................3-1-6
1.6 Cleaning the Machine Interior (Weekly)...........................................................3-1-8
1.7 Cleaning the Strobe Light Unit (Weekly)..........................................................3-1-9
1.8 Cleaning the Strobe Light Unit (Every 3 Months) ..........................................3-1-11
1.9 Cleaning the Regulator Filter (Monthly).........................................................3-1-12
Cleaning Checklist...............................................................................................3-1-13
Contents – List of Current Pages
Edition 3.1 v XP-142E Mechanical Reference