00196715-04_IM_SSW_704_03_SP1_DE_EN - 第36页
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition 6.1 Welcome screen Figure 6-2: Welcome screen ► Click the Next button. The necessary files are installed on the V ision computer. 6.2 Finalizing t…
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition
6 Installing the Vision computer software
CAUTION
The station software must not run on the station computer during installation of the
Vision computer software!
NOTICE
In one-computer operation the Vision computer software is automatically installed during
the station software installation.
In two-computer operation the Vision computer software has to be installed explicitly.
The installation requires approximately 20 minutes.
► Connect the USB keyboard to the Vision computer.
► Connect the USB CD drive to the Vision computer.
► Switch the video multiplexer from the machine computer to the Vision computer.
► Log in to the Vision computer as Administrator.
► Insert the installation CD in the drive.
► Open the Explorer and start setup.exe under drive E by double clicking it.
The SIPLACE Choice Center dialog box is opened.
Figure 6-1: "SIPLACE Choice Center" dialog box
► Click the Vision computer button.
Installation of the vision computer software continues with the welcome screen.
35
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition
6.1 Welcome screen
Figure 6-2: Welcome screen
► Click the Next button.
The necessary files are installed on the Vision computer.
6.2 Finalizing the installation
NOTICE
The status only lists the programs that have just been installed.
If errors occurred during installation, the status is indicated by the Error button being
displayed next to the program name instead of the Ok button.
► If you wish to read the log of the installation of any program, click the Ok (or Error) button next
to the name of the program.
The Notepad editor is started and displays the appropriate file.
36
Station Software 704.03 SP1 / Installation Manual Ausgabe 10/2011 Edition
Figure 6-3: Finalizing the installation
► Click the Finish button.
► Reconnect the USB keyboard to the machine computer.
► Reconnect the USB CD drive to the machine computer.
► Switch the video multiplexer from the Vision computer to the machine computer.
CAUTION
► Wait a few seconds after you have clicked the Finish button, before you switch off
the computer / the machine!
As some installation steps are not performed until the end of the installation by the
InstallShield, the installation might otherwise be incomplete, what may cause
problems during further installations.
NOTICE
To establish the connection between the SIPLACE Vision computer software and the
SIPLACE station software after the installation has been completed, the Vision computer
and the machine computer must first be shut down and the machine must then be
completely switched off.
37