00191134-03 - 第170页

GEM for SIPLACE V5.01 Page 170 of 252 ©Siemens AG, all rights reserved 9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ ComPic kedUp Num ber of com ponents which were picked up su ccessfully since the last PCB reached…

100%1 / 245
GEM for SIPLACE V5.01
©Siemens AG, all rights reserved page 169 of 252
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
,RSHQBQR]]OH!>PEDU@
,FORVHGBQR]]OH!>PEDU@
,FXELFBQR]]OH!>PEDU@
,QRWBFXELFBQR]]OH!>PEDU@
,WROBGLUW\BQR]]OH!>PEDU@
,WROBOHDN\ BQR]]OH!>PEDU@
!

!
The first element in this list refers to segment 1, the
second to segment 2, and so on.
tol_dirty_nozzle and tol_leaky_nozzle are currently not
used.
An empty list indicates an error.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
Revolver Head 2 (SIPLACE 80 S 20 only)
1412001 SV I4 HEIGHTREV2
Height of revolver head 2. Only valid after height
reference run. Units are 1/1000 mm. Only valid for
SIPLACE 80S. On a SIPLACE 80F this variable will
contain 0
During the reference run the SIPLACE measures the
distance between the upper edge of the conveyor belt
and the nozzle on segment 1. The
HEIGHTREVOLVER1 is then calculated by subtracting
the length of the nozzle on segment 1 form the
measured value. The nozzle length is defined in the
machine data. So HEIGHTREVOLOR1 is a relative
not an absolute value.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
A value of 0 indicates an error.
1412002 SV L GANTRYINFOREV2
Gantry information for revolver head 2. The data is
automatically reseted when a PCB reaches the center
conveyor.
/
,&RP3LFNHG8S!
,&RPS3ODFHG!
,&RPS/HIW3ODFH!
!
GEM for SIPLACE V5.01
Page 170 of 252 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
ComPickedUp Number of components which
were picked up successfully since
the last PCB reached the center
conveyor
CompPlaced Number of components which
were placed since the last PCB
reached the center conveyor
CompLeft2Place Number of components left to be
placed on the actual PCB
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1412003 SV L PLACEINFOREV2
Placement information for revolver head 2. Only valid
for SIPLACE 80S. On a SIPLACE 80F this variable will
contain an empty list.
/
/
8;SRVLWLRQ!>PP@
8<SRVLWLRQ!>PP@
)$QJOH!>GHJUHHV@
8)RUFH,QGH[!
$5HIHUHQFH'HVLJQDWRU!
$&RPSRQHQW1DPH!
83DFNDJH)RUP1XPEHU!
83ODFHPHQW5HVXOW!
,3ODFHPHQW9DFXXP!
,9DFXXP!
8'DWD9DOLG!
,;GHYLDWLRQ!>PP@
,<GHYLDWLRQ!>PP@
)$QJOH!>GHJUHHV@
84XDOLW\!>@
8/HQJWK!>PP@
8:LGWK!>PP@
/
,3LWFKBSHUBOHDGBJURXS!

,3LWFKBSHUBOHDGBJURXS!
GEM for SIPLACE V5.01
©Siemens AG, all rights reserved page 171 of 252
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
!
)0D[/HDG'HY!>PP@
)0D[%DOO'HY!>PP@
)2UWKR'HY!>GHJ@
8/HDG&RXQW!
!

!
The first element in this list refers to segment 1, the
second to segment 2 and so on. If a segment was not
in use in the last placement cycle the list for that
segment is left empty.
The fields following the data item „DataVaild“
represent the result of optical centering. All fields are
not necessarily valid for all package forms. Verify the
validity of a field using the „data valid“ byte and refer to
the corresponding flag for the appropriate field.
[;GHY<GHYDQGDQJOH
[OHQJWKDQG ZLGWK
[OHDGFRXQW
[SLWFK
[RUWKRJRQDOGHYLDWLRQ
[PD[OHDGGHYLDWLRQ
[PD[EDOOGHYLDWLRQ
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1412004 SV L PICKUPINFOREV2
Pick-up information for revolver head 2. Only valid for
SIPLACE 80S. On a SIPLACE 80F this variable will
contain an empty list.
/
/
$&RPSRQHQW1DPH!
,7UDFN1XPEHU!
8)HHGHU7\SH!
,/HYHO!
,'LYLVLRQ!
80DFKLQH6LGH!