00191134-03 - 第171页
GEM for SIPLACE V5.01 ©Siemens AG, all rights r eserved page 171 of 252 9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ ! )0D[/HDG 'HY!>PP@ )0D[%DOO'HY !>PP@ )2UWKR'HY !…
GEM for SIPLACE V5.01
Page 170 of 252 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
ComPickedUp Number of components which
were picked up successfully since
the last PCB reached the center
conveyor
CompPlaced Number of components which
were placed since the last PCB
reached the center conveyor
CompLeft2Place Number of components left to be
placed on the actual PCB
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1412003 SV L PLACEINFOREV2
Placement information for revolver head 2. Only valid
for SIPLACE 80S. On a SIPLACE 80F this variable will
contain an empty list.
/
/
8;SRVLWLRQ!>PP@
8<SRVLWLRQ!>PP@
)$QJOH!>GHJUHHV@
8)RUFH,QGH[!
$5HIHUHQFH'HVLJQDWRU!
$&RPSRQHQW1DPH!
83DFNDJH)RUP1XPEHU!
83ODFHPHQW5HVXOW!
,3ODFHPHQW9DFXXP!
,9DFXXP!
8'DWD9DOLG!
,;GHYLDWLRQ!>PP@
,<GHYLDWLRQ!>PP@
)$QJOH!>GHJUHHV@
84XDOLW\!>@
8/HQJWK!>PP@
8:LGWK!>PP@
/
,3LWFKBSHUBOHDGBJURXS!
,3LWFKBSHUBOHDGBJURXS!
GEM for SIPLACE V5.01
©Siemens AG, all rights reserved page 171 of 252
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
!
)0D[/HDG'HY!>PP@
)0D[%DOO'HY!>PP@
)2UWKR'HY!>GHJ@
8/HDG&RXQW!
!
!
The first element in this list refers to segment 1, the
second to segment 2 and so on. If a segment was not
in use in the last placement cycle the list for that
segment is left empty.
The fields following the data item „DataVaild“
represent the result of optical centering. All fields are
not necessarily valid for all package forms. Verify the
validity of a field using the „data valid“ byte and refer to
the corresponding flag for the appropriate field.
[;GHY<GHYDQGDQJOH
[OHQJWKDQG ZLGWK
[OHDGFRXQW
[SLWFK
[RUWKRJRQDOGHYLDWLRQ
[PD[OHDGGHYLDWLRQ
[PD[EDOOGHYLDWLRQ
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1412004 SV L PICKUPINFOREV2
Pick-up information for revolver head 2. Only valid for
SIPLACE 80S. On a SIPLACE 80F this variable will
contain an empty list.
/
/
$&RPSRQHQW1DPH!
,7UDFN1XPEHU!
8)HHGHU7\SH!
,/HYHO!
,'LYLVLRQ!
80DFKLQH6LGH!
GEM for SIPLACE V5.01
Page 172 of 252 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
83LFN8S5HVXOW!
,3LFN8S9DFXXP!
,9DFXXP!
!
!
The first element in this list refers to segment 1, the
second to segment 2 and so on. If a segment was not
in use in the last pick up cycle the list for that segment
is left empty.
If the component was picked up from a feeder /HYHO
will contain -1. In the case that the component was
picked up from a tray in the waffle pack changer
7UDFN1XPEHU is set to -1. If both values are not equal
to -1 the component was picked up from a „manual
tray“.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1412005 SV L NOZZLECONF2
Nozzle configuration on revolver head 2. Only valid for
SIPLACE 80S. On a SIPLACE 80F this variable will
contain an empty list.
/
/>@
812==/(B7<3(!
,5($/B12==/(B/(1*7+!>PP@
!
!
The nozzle length is measured during the reference
run. It depends on the HEIGHTREVOLVER2 value. So
REAL_NOZZLE_LENGTH is not a absolute but a
relative value.
It is calculated by subtracting the measured distance
between the nozzle and the upper edge of the
transport belt from the HEIGHTREVOLVER1 value.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1412006 SV L VACUUMDATAREV2
Vacuum measurements from the last reference run on
revolver head 2. Only valid for SIPLACE 80S. On a
SIPLACE 80F this variable will contain an empty list.