00191134-03 - 第175页
GEM for SIPLACE V5.01 ©Siemens AG, all rights r eserved page 175 of 252 9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ conveyor belt from the HEIGHTIC value. For a detailed descr iption of the data item see „4.2 Dat…
GEM for SIPLACE V5.01
Page 174 of 252 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
ComPickedUp Number of components which
were picked up successfully since
the last PCB reached the center
conveyor
CompPlaced Number of components which
were placed since the last PCB
reached the center conveyor
Comp Number of components left TO BE placed on
the actual PCB Number of
components left to be placed on
the actual PCB
An empty list indicates an error.
1512003 SV L NOZZLECONFIC
Nozzle on the IC-Head. Only valid for SIPLACE 80F.
On a SIPLACE 80S this variable will contain an empty
list.
/
812==/(B7<3(!
,5($/B12==/(B/(1*7+!>PP@
!
The nozzle length is measured during the reference
run. It depends on the HEIGHTIC value. So
REAL_NOZZLE_LENGTH is not a absolute but a
relative value.
It is calculated by subtracting the measured distance
between the nozzle and the upper edge of the
conveyor belt from the HEIGHTIC value.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1512004 SV L NOZZLERETURN
Last nozzle returned to the nozzle-changer by the IC-
head. Only valid for SIPLACE 80F. On a SIPLACE
80S this variable will contain an empty list.
/
812==/(B7<3(!
,5($/B12==/(B/(1*7+!>PP@
!
The nozzle length is measured during the reference
run. It depends on the HEIGHTIC value. So
REAL_NOZZLE_LENGTH is not a absolute but a
relative value.
It is calculated by subtracting the measured distance
between the nozzle and the upper edge of the
GEM for SIPLACE V5.01
©Siemens AG, all rights reserved page 175 of 252
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
conveyor belt from the HEIGHTIC value.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1512010 SV L VACUUMDATAIC
Vacuum measurements IC-Head. Only valid for
SIPLACE 80F. On a SIPLACE 80S this variable will
contain an empty list.
/
,RSHQBQR]]OH!
,FORVHGBQR]]OH!
,FXELFBQR]]OH!
,QRWBFXELFBQR]]OH!
,WROBGLUW\BQR]]OH!
,WROBOHDN\ BQR]]OH!
!
tol_dirty_nozzle and tol_leaky_nozzle are currently not
used.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1512013 SV L COPLANARITYDATAIC
Result of last coplanarity measurement. Only valid for
SIPLACE 80F. On a SIPLACE 80S this variable will
contain an empty list.
/
$&RPSRQHQW1DPH!
83DFNDJH)RUP1XPEHU!
85HVXOW!0:Ok; 1:Error
,0D[/HDG'HY!>PP@
!
The coplanarity module measures the height of all
leads and calculates then a hypothetical plane through
the three highest leads. 0D[/HDG'HY is the greatest
deviation between one lead and this plane.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1512014 SV L PLACEINFOIC
GEM for SIPLACE V5.01
Page 176 of 252 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
Placement information for IC-head 2 Only valid for
SIPLACE 80F. On a SIPLACE 80S this variable will
contain an empty list.
/
8;SRVLWLRQ!>PP@
8<SRVLWLRQ!>PP@
)$QJOH!>GHJUHHV@
8)RUFH,QGH[!
$5HIHUHQFH'HVLJQDWRU!
$&RPSRQHQW1DPH!
83DFNDJH)RUP1XPEHU!
83ODFHPHQW5HVXOW!
,3ODFHPHQW9DFXXP!
,9DFXXP!
8'DWD9DOLG!
,;GHYLDWLRQ!>PP@
,<GHYLDWLRQ!>PP@
)$QJOH!>GHJUHHV@
84XDOLW\!>@
8/HQJWK!>PP@
8:LGWK!>PP@
/
,3LWFKBSHUBOHDGBJURXS!
,3LWFKBSHUBOHDGBJURXS!
!
)0D[/HDG'HY!>PP@
)0D[%DOO'HY!>PP@
)2UWKR'HY!>GHJ@
8/HDG&RXQW!
!
The fields following the data item „DataVaild“
represent the result of optical centering. All fields are
not necessarily valid for all package forms. Verify the
validity of a field using the „data valid“ byte and refer to
the corresponding flag for the appropriate field.
[;GHY<GHYDQGDQJOH
[OHQJWKDQG ZLGWK
[OHDGFRXQW
[SLWFK