00191134-03 - 第177页

GEM for SIPLACE V5.01 ©Siemens AG, all rights r eserved page 177 of 252 9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ [RUWKRJRQDOG HYLDWLRQ [PD[OHDGGHY LDWLRQ [PD[EDOOGHY LDWLRQ For a de…

100%1 / 245
GEM for SIPLACE V5.01
Page 176 of 252 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
Placement information for IC-head 2 Only valid for
SIPLACE 80F. On a SIPLACE 80S this variable will
contain an empty list.
/
8;SRVLWLRQ!>PP@
8<SRVLWLRQ!>PP@
)$QJOH!>GHJUHHV@
8)RUFH,QGH[!
$5HIHUHQFH'HVLJQDWRU!
$&RPSRQHQW1DPH!
83DFNDJH)RUP1XPEHU!
83ODFHPHQW5HVXOW!
,3ODFHPHQW9DFXXP!
,9DFXXP!
8'DWD9DOLG!
,;GHYLDWLRQ!>PP@
,<GHYLDWLRQ!>PP@
)$QJOH!>GHJUHHV@
84XDOLW\!>@
8/HQJWK!>PP@
8:LGWK!>PP@
/
,3LWFKBSHUBOHDGBJURXS!

,3LWFKBSHUBOHDGBJURXS!
!
)0D[/HDG'HY!>PP@
)0D[%DOO'HY!>PP@
)2UWKR'HY!>GHJ@
8/HDG&RXQW!
!
The fields following the data item „DataVaild“
represent the result of optical centering. All fields are
not necessarily valid for all package forms. Verify the
validity of a field using the „data valid“ byte and refer to
the corresponding flag for the appropriate field.
[;GHY<GHYDQGDQJOH
[OHQJWKDQG ZLGWK
[OHDGFRXQW
[SLWFK
GEM for SIPLACE V5.01
©Siemens AG, all rights reserved page 177 of 252
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
[RUWKRJRQDOGHYLDWLRQ
[PD[OHDGGHYLDWLRQ
[PD[EDOOGHYLDWLRQ
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
1512015 SV L PICKUPINFOIC
Pick-up information for IC-head . Only valid for
SIPLACE 80F. On a SIPLACE 80S this variable will
contain an empty list.
/
$&RPSRQHQW1DPH!
,7UDFN1XPEHU!
8)HHGHU7\SH!
,/HYHO!
,'LYLVLRQ!
80DFKLQH6LGH!
83LFN8S5HVXOW!
,3LFN8S9DFXXP!
,9DFXXP!
!
If the component was picked up from a feeder /HYHO
will contain -1. In the case that the component was
picked up from a tray in the waffle pack changer
7UDFN1XPEHU is set to -1. If both values are not equal
to -1 the component was picked up from a „manual
tray“.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
I / O Ports
2012001 SV U1 INPUTPORTBYTE1
Bit 0: If bit is set, the upper proximity switch of the
lifting table is not switched.
Bit 1: If bit is set, the lower proximity switch of the
lifting table is not switched.
Bit 2: If bit is set, the proximity switch of the
stopper of the parallel conveyer is switched.
GEM for SIPLACE V5.01
Page 178 of 252 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
Bit 3: If bit is set, the proximity switch of the
adjustment width is switched.
Bit 4: If bit is set, the adjustment width is at the
limit switch.
Bit 5: If bit is set, the proximity switch of the
stopper is switched.
Bit 6: If bit is set, the software switch high voltage
is off.
Bit 7: If bit is set, the ceramic substrate centering
is open.
A value of -1 indicates an error
2012002 SV U1 INPUTPORTBYTE2
Bit 0: If bit is set, high voltage is on.
Bit 1: If bit is set, the emergency stop button is
down.
Bit 2: If bit is set, the protective covers are open.
Bit 3: If bit is set, the start button was actuated.
Bit 4: If bit is set, the stop button was actuated.
Bit 5: If bit is set, the key switch is not set.
Bit 6: If bit is set, the compress air unit is active.
Bit 7: If bit is set, the axis operation voltage is
active.
A value of -1 indicates an error
2012003 SV U1 INPUTPORTBYTE3
Bit 0: If bit is set, the gantry crash sensor was set
Bit 1: If bit is set, the gantry proximity sensor was
set.
Bit 2: If bit is set, the open proximity switch of the
nozzle changer of gantry 1 is switched.
Bit 3: If bit is set, the close proximity switch of the
nozzle changer of gantry 1 is switched.
Bit 4: If bit is set, the open proximity switch of the
nozzle changer of gantry 2 is switched.
Bit 5: If bit is set, the close proximity switch of the
nozzle changer of gantry 2 is switched.
Bit 6: If bit is set, the center conveyer sensor is
covered.
Bit 7: If bit is set, the center conveyer sensor of
parallel conveyor is covered. A value of -1
indicates an error
2012004 SV U1 INPUTPORTBYTE4
Bit 0: If bit is set, the Interface signal "Request"
to the preceding station is active.
Bit 1: If bit is set, the Interface signal "Sent" to the