00191134-03 - 第240页

GEM for SIPLACE V5.01 Page 240 of 252 ©Siemens AG, all rights reserved 2111010 FM_FLUX_CHECKSUMME Check sum error upon activation of f lux pump* 1 2111011 FM_FLUX_Z_OBEN Z-axis of flux nozzle not in raised position* 1 21…

GEM for SIPLACE V5.01

<GANTRYINFOREV2> or

<GANTRYINFOIC> will be updated.

2010004 TrackFull Track reset to full 1

2010005 TrackEmpty Track set to empty 1

2010006 RefRunGantry1 Reference run complete for the gantry 1

axis

2010007 RefRunGantry2 Reference run complete for the gantry 2

axis

2010008 TableDownload Software downloaded to the table and

<SOFTWAREREVTABLE> will be

updated.

2010009 SingleCircuitOmit The machine signals that it found a single

circuit to omit (Ink Punkt)

2010010 TapeCutLeft Tape cut on left side of machine 1

2010011 TapeCutRight Tape cut on right side of machine 1

2010013 PCBstartProcessing Start of the placement process for the

PCB in the center conveyor

2010015 MachineReStarted SIPLACE station is re-booting 1

2010016 PickupError An Pickup-Error has occured and

<SEGMENT>, <COMPONENTNAME>,

<MASCHINESIDE>, <TRACKNUMBER>,

<DIVISION>, <LEVEL>, <GANTRYID>,

will be updated

2010017 PlaceError An Place-Error has occured and

<SEGMENT>,

<REFERENCEDESIGNATOR>,

<COMPONENTNAME>, <GANTRYID>,

<GANTRYGROUPID>, <HEADID>,

<PACKAGEFORMNUMBER> and

<PLACEERRORDESCRIPTION> will be

updated

)OX[

CEID Name Description

2111001 FM_FLUX_SYSFEHL Flux module: System error in SW

module*

2111002 FM_FLUX_WRITE_FLUXMA Flux module: Error writing FLUX.MA file* 1

2111003 FM_FLUX_READ_FLUXMA Flux module: Error reading FLUX.MA file* 1

2111004 FM_FLUX_NOT_INIT Flux pump not initialized* 1

2111005 FM_FLUX_INITIALISIEREN Error upon initialization of flux pump* 1

2111006 FM_FLUX_VALVE Faulty flux valve* 1

2111007 FM_FLUX_PLUNGER Faulty flux syringe* 1

2111008 FM_FLUX_TIMEOUT Timeout of flux pump* 1

2111009 FM_FLUX_COMMAND Incorrect command to flux pump* 1

GEM for SIPLACE V5.01

2111010 FM_FLUX_CHECKSUMME Checksum error upon activation of flux

pump*

2111011 FM_FLUX_Z_OBEN Z-axis of flux nozzle not in raised

position*

2111012 FM_FLUX_Z_KLEMMT Z-axis of flux nozzle jammed* 1

2111013 FM_FLUX_LEER Flux tank empty* 1

2111014 FM_FLUX_NACHFUELLEN Warning: Replenish flux tank* 1

* Depending on the collection event, some of the status variables <ERRORTYPE>,

<GANTRYONERROR>, <SEGMENTONERROR>, <TRACKONERROR>,

<ERRORINFO1> and <ERRORINFO2> will be updated at each of these flux

collection events.

GEM for SIPLACE V5.01

 $ODUPV

There are no alarms defined for SIPLACE

$/,' $/&' $/7; 'HVFULSWLRQ 21&(,' 2))

&(,'

$/,' Alarm ID

$/&' Alarm Severity Code. The low-order 7-bits of ALCD specifies the severity

code. The high-order bit (bit-8) shows the current alarm state (1=SET,

0=CLEAR).

$/7; Alarm Text. This is the actual string sent the Host in the Alarm Report

(S5F1).

21&(,' This is the Collection Event that is signaled when the alarm state changes

from CLEAR to SET ("going-on").

2))&(,' This is the Collection Event that is signaled when the alarm state changes

from SET WRCLEAR ("going-off").